CBR 929 2 Fan setup?

[JOKER-OF-FFX]

I'm trying to run a 2 fan setup. Wiring is not a problem. I having problem with mounting the fan. Has anyone been successfull at this? It also would help if anyone has pics of theirs. thanks

[sho,ya,stunt]

DID YOU FIGURE OUT A WAY i WANT TO DO THE SAME THING

[R1Alvin]

Depends on the fan--I use an F4i fan--use some home depot steel to make a simple 3 inch by 2 inch plate--use this to tie the mounts from the stock fan tab to the f4i fan tab--just zip tie the other 2 tabs on the f4i and use a spacer between the radiator and mounting points so the fins dont scrape. Here's a shitty pic of mine but I'm not pulling all my plastics off...

-Alvin

[sho,ya,stunt]

Depends on the fan--I use an F4i fan--use some home depot steel to make a simple 3 inch by 2 inch plate--use this to tie the mounts from the stock fan tab to the f4i fan tab--just zip tie the other 2 tabs on the f4i and use a spacer between the radiator and mounting points so the fins dont scrape. Here's a shitty pic of mine but I'm not pulling all my plastics off...

-Alvin

i LIKE HOW YOU CAN STILL READ THE F4I ON THE BACK OFF THE FAN, THATS GANGSTA, DOES THE TWO FANS REALLY HELP, OR NOT

[R1Alvin]

i LIKE HOW YOU CAN STILL READ THE F4I ON THE BACK OFF THE FAN, THATS GANGSTA, DOES THE TWO FANS REALLY HELP, OR NOT

Fukkin right! it works like a charm! I got both fans wired to a single switch straight to my battery--hurricane force wind down there.

Lets just say this--I punctured my head block in my motor mount and it leaks coolant. My mechanic buddy said my motor was going to blow up 4 months ago if i did'nt swap heads. I added the f4i fan and it runs perfectly fine--but i got to keep the fans running all the time or it overheats and the bike takes a dump.....lol

-Alvin

[Wheeliest]

yeah my r6 fan is on in off every minute, i got a spare 636 fan ima wire up to a switch, ima weld some tabs onto the rad for it.