EaZeNuTz33
10-27-2005, 01:07 PM
Looking like I have to sell my baby to keep my stuntbike!!!
2001 Honda TRX400EX, 426 piston, hot cam, pro-armor nerf bars, ITP holeshots, Black ITP rims (rears are beadlocks), Maier Silver racing plastics(rear cut to fit foot in shortened bar), Motion Pro twist throttle, parking brake block off plate, Lonestar bearing carrier, I cut down the clutch lever, MSR shorty brake lever, K&N air filter, full Muzzy exhaust(was over $700), homemade super strong/reinforced 12 bar of almost 1/2" thick walled 1-1/4" pipe.
Comes with a factory service manual.
No headlight and no tailight.
Never titled it or paid sales tax.
As for whats wrong with it....not much. Left side of handlebars are bent, front end needs to be aligned (10 minute job, but I'm lazy).
Lately has been used as somin else to ride while my stuntbike had no motor!!!
Sits 90% of the time, but I DON'T WANT TO SELL IT.
I'm firm on $2,500, and pick up only. I live north of Kansas City, Missouri and can drive a little ways to meet you. I'm set-up on paypal or will take cash or check from a bank. No personal checks(sorry can't trust people I don't know).
I also have a rear caliper(25) and bracket(25, or 10 with the caliper) for an F4i, a rear honda master cylinder, and some other random parts from below.
I also have for a 600RR:
Rear Caliper ($20)
Guage Cluster--all LED's changed to red ($60)
Chopped Carbon Fiber Upper ($50) Windscreen and sides are cut from sides to rounded peek in the center
Clip-ons (left is bent slightliy/right is fine) ($30/pair)
Air Damn Covers-one is cracked ($15/pair)
Stock sprockets(almost no wear) ($25/both)
Stunt modified tank(cut and flipped) ($10)
I also have for a 400EX:
Rear Wheel(painted on/ with old tire) ($10)
Handlebar Risers(sides shaved down) ($15)
If you are intersted in any parts or the 400EX let me know with below contact info:
Dillen Easley
816-516-0822
EaZeNuTZ33@aol.com
2001 Honda TRX400EX, 426 piston, hot cam, pro-armor nerf bars, ITP holeshots, Black ITP rims (rears are beadlocks), Maier Silver racing plastics(rear cut to fit foot in shortened bar), Motion Pro twist throttle, parking brake block off plate, Lonestar bearing carrier, I cut down the clutch lever, MSR shorty brake lever, K&N air filter, full Muzzy exhaust(was over $700), homemade super strong/reinforced 12 bar of almost 1/2" thick walled 1-1/4" pipe.
Comes with a factory service manual.
No headlight and no tailight.
Never titled it or paid sales tax.
As for whats wrong with it....not much. Left side of handlebars are bent, front end needs to be aligned (10 minute job, but I'm lazy).
Lately has been used as somin else to ride while my stuntbike had no motor!!!
Sits 90% of the time, but I DON'T WANT TO SELL IT.
I'm firm on $2,500, and pick up only. I live north of Kansas City, Missouri and can drive a little ways to meet you. I'm set-up on paypal or will take cash or check from a bank. No personal checks(sorry can't trust people I don't know).
I also have a rear caliper(25) and bracket(25, or 10 with the caliper) for an F4i, a rear honda master cylinder, and some other random parts from below.
I also have for a 600RR:
Rear Caliper ($20)
Guage Cluster--all LED's changed to red ($60)
Chopped Carbon Fiber Upper ($50) Windscreen and sides are cut from sides to rounded peek in the center
Clip-ons (left is bent slightliy/right is fine) ($30/pair)
Air Damn Covers-one is cracked ($15/pair)
Stock sprockets(almost no wear) ($25/both)
Stunt modified tank(cut and flipped) ($10)
I also have for a 400EX:
Rear Wheel(painted on/ with old tire) ($10)
Handlebar Risers(sides shaved down) ($15)
If you are intersted in any parts or the 400EX let me know with below contact info:
Dillen Easley
816-516-0822
EaZeNuTZ33@aol.com