929 Parts FS [Archive] - Bike Stunts, Extreme Motorcycle Stunts, Motorcycle Stunt Riding

jdridin

11-01-2005, 10:23 AM

Whatsup yall, I have some alot of 929 parts that need to go. Let me know what you need and ill let you know a price and if I have it.

Thanks Justin

Zuki750

11-01-2005, 10:44 AM

Any plastic? I need a right side mid.

decepticon13

11-01-2005, 12:54 PM

need the left side mid and ram air covers. need a +5 sprocket for either a 525 or 530 chain, sure what size

CrTcHRkTRcR

11-01-2005, 01:04 PM

ahahha the quest for the right side mid begins for you! good luck with that!! do you have a gauge cluster, and fairing stays?

jdridin

11-01-2005, 05:12 PM

Any plastic? I need a right side mid.

I got all other plastics except for the right side mid.

I have a full set of black/red plastic except for mids that i would sell for $750.
Heres what it will include. All plastic are in very good condition even though they have been used. They do not have any cracks or rash on them.

Front Fairing w/headlight and integrated blinkers
Front Fender
Both Right and Left Lower Fairings
Rear Fairing w/taillight
Gas Tank w/o fuel pump
Ohh and the ram air covers

Let me know. Ill take $750 + shipping. That seems fair to me.

I also have a full set of semi stunt plastics, that have never been put on but have been rhino lined so they shouldnt break. I have everything except the right mid. $400 obo + shipping.

Id like to keep both of these sets together so just let me know.

Peace Justin

decepticon13

11-01-2005, 05:14 PM

i need the ram air covers from one of the sets.

jdridin

11-01-2005, 05:16 PM

need the left side mid and ram air covers. need a +5 sprocket for either a 525 or 530 chain, sure what size

All I got is a -1 down. Brand New Ill Take $25 + shipping

or a

Stock front and a +13, both used for 30 minutes (no lie) before my motor messed up on me. This set will also come with a X-Ring chain. Ill take $150 + shipping for this set. (This will also work for an F4I, but instead of +13 it will be a +10). Let me know if anyone is interested. Ohh and this is from Thrust Company too so it is not cheap stuff.

Thanks Justin

jdridin

11-01-2005, 05:19 PM

i need the ram air covers from one of the sets.

Ill take $20 + shipping if thats cool. Let me know.

Peace Justin

jdridin

11-01-2005, 05:23 PM

ahahha the quest for the right side mid begins for you! good luck with that!! do you have a gauge cluster, and fairing stays?

Yes I have a guage cluster w/ around 11,000 miles give or take but it has a small crack where the digital speedo is. Shouldnt affect anything but just lettin you know. Ill take $75 + shipping for the cluster.

I also have the fairing stays and I believe both are straight but have never put a front fairing on it. Ill take $50 + shipping for this. (PS It looks like it has been straitened out before from a small bend, but like I said I have never done anything too it since I bought the bike)

Let me know.

Peace Justin

Suicidal Antics

11-01-2005, 09:22 PM

individual prices for frame (if u have title), wiring harness, key switch, tail (stunt or otherwise), tail light, and headlight?

jdridin

11-02-2005, 12:27 PM

individual prices for frame (if u have title), wiring harness, key switch, tail (stunt or otherwise), tail light, and headlight?

I have a mint headlight and a stunt tail (just some cracks and rash, not cutoff though), Ill sell both for $200 obo + shipping. The headlight is in mint condition. Let me know.

Peace Justin

Suicidal Antics

11-02-2005, 02:59 PM

just found out last night ive got a electrical drain somewhere... dont feel like chasing wires, so i really need a harness.

jdridin

11-02-2005, 03:59 PM

just found out last night ive got a electrical drain somewhere... dont feel like chasing wires, so i really need a harness.

I think Im gonna keep the harness for right now but if I change my mind ill definitely let you know.

Are you still interested in the headlight and the tail. Let me know.

Peace Justin

decepticon13

11-02-2005, 04:23 PM

ill take the ram air covers for 20$ plus shipping for sure.

skyline-gtr@excite.com is my paypal. send me an invoice.

robby newman
6490 kilimanjaro
evergreen, co 80439

720-490-7237

krashdummy929

11-02-2005, 09:12 PM

i need front rim, right front foot peg, stator, front brake master cylinder, ignition with hey+gas cap ....prices??

Suicidal Antics

11-02-2005, 10:15 PM

I think Im gonna keep the harness for right now but if I change my mind ill definitely let you know.

Are you still interested in the headlight and the tail. Let me know.

Peace Justin

I cant right now.... the harness has taken priority, and between a bike, building an engine for the car over the winter, and audio/visual upgrades in the truck, money is scarce.......i can rock without a headlight or tail... dead batteries at the end of every session is not cool.

jdridin

11-03-2005, 11:31 AM

I cant right now.... the harness has taken priority, and between a bike, building an engine for the car over the winter, and audio/visual upgrades in the truck, money is scarce.......i can rock without a headlight or tail... dead batteries at the end of every session is not cool.

I hear yeah. That sucks bad. Well let me know later on or whatever.

Peace Justin

jdridin

11-03-2005, 11:36 AM

i need front rim, right front foot peg, stator, front brake master cylinder, ignition with hey+gas cap ....prices??

I have the Master Cylinder and ill take $60 + shipping. Includes the lever and the resevoir also.

Are you needing the stator or the stator cover. Let me know.

Are you also needing the whole front end w/the front wheel or just the front wheel. Let me know cause I would like to keep the whole front end setup together to sell. If you want it Ill hook you up with a decent deal.

I dont have the ignition or gas cap since I sold those to my boy.

Well let me know with a pm or whatever.

Thanks Justin

jdridin

11-07-2005, 01:56 PM

BUMP BUMP

krashdummy929

11-07-2005, 08:06 PM

I have the Master Cylinder and ill take $60 + shipping. Includes the lever and the resevoir also.

Are you needing the stator or the stator cover. Let me know.

Are you also needing the whole front end w/the front wheel or just the front wheel. Let me know cause I would like to keep the whole front end setup together to sell. If you want it Ill hook you up with a decent deal.

I dont have the ignition or gas cap since I sold those to my boy.

Well let me know with a pm or whatever.

Thanks Justin
need the stator only and front rim only...let me know how much for all that plus master cyl +shipping..thanx

jdridin

11-08-2005, 04:47 PM

need the stator only and front rim only...let me know how much for all that plus master cyl +shipping..thanx

I can get you the master cylinder but everything else is already sold. Let me know if you want it.

Thanks Justin

krashdummy929

11-08-2005, 07:40 PM

I can get you the master cylinder but everything else is already sold. Let me know if you want it.

Thanks Justin
eh never mind.... was hoping for the other shit more... thanx anyway

jdridin

11-08-2005, 08:39 PM

Alright sorry about that man.

Lata Justin

Busa_boy_02

11-10-2005, 01:10 AM

hey man do you have a mid pipe for the exhaust cheap?

jdridin

11-10-2005, 08:41 AM

Are you talkin about the servo type deal or the one that goes in between that and the can. I got both but need to know which you want. Let me know.

Thanks Justin

20dub

11-10-2005, 11:57 AM

I can get you the master cylinder but everything else is already sold. Let me know if you want it.

Thanks Justin

i need that master cylinder...i need a front brake lever and a right passenger bracket too...what you got..........?

jdridin

11-10-2005, 02:04 PM

i need that master cylinder...i need a front brake lever and a right passenger bracket too...what you got..........?

I got the whole master cylinder with the brake lever still on and I also have the right passenger bracket also. Do you need the footpeg with the bracket or not. Let me know. Ill take like $75 + shipping for it all. Let me know.

Thanks Justin

20dub

11-10-2005, 06:08 PM

I got the whole master cylinder with the brake lever still on and I also have the right passenger bracket also. Do you need the footpeg with the bracket or not. Let me know. Ill take like $75 + shipping for it all. Let me know.

Thanks Justin

sounds good.....yeah i could use the footpeg if you want to throw it in there.
wait...i need the passenger bracket that does not hold the exhaust..is that the left or right...?i think i fugged up...

jdridin

11-11-2005, 04:06 PM

sounds good.....yeah i could use the footpeg if you want to throw it in there.
wait...i need the passenger bracket that does not hold the exhaust..is that the left or right...?i think i fugged up...

Thats the left side. LOL. I got one of those too. Ill do the same deal, whole master with lever and the LEFT side passenger bracket for $75 + shipping. I dont have the footpeg so I just wanted to let you know. Let me know your zip and I will check on shipping Monday mourning.

Thanks Justin

20dub

11-11-2005, 04:16 PM

Thats the left side. LOL. I got one of those too. Ill do the same deal, whole master with lever and the LEFT side passenger bracket for $75 + shipping. I dont have the footpeg so I just wanted to let you know. Let me know your zip and I will check on shipping Monday mourning.

Thanks Justin

sounds good..i got a peg so that's alright.....zip is 07719 ..thanks..tom