Dirty Mike Dirt!

[scott3824]

looks really fancy

She didn't like my idea of the VFW :clint:

[scott3824]

Proof toledo is boring:
area attractions in Toledo such as COSI Museum, Toledo Zoo, Toledo Museum of Art & Glass Pavilion, Toledo Mudhens Triple A Baseball Team and Seagate Convention Centre.

Our museum us actually world renowned for something. The Zoo is ranked high for seomthing special I think as well. The mudhens are huge here, everyone goes to games and parties hard downtown. We are going to opening day. Otherwise yeah it's boring. But I would take it over detroit any day.

[MikeM]

She didn't like my idea of the VFW :clint:

tell her shes gonna be poor for a few years if she doesnt go for the vfw idea.

[Zuki750]

http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=262156646

Just a reminder. I think there's a couple new pics of her ass.

[Niner]

http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=262156646

Just a reminder. I think there's a couple new pics of her ass.

Her friend has a ncie ass:
http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=262156646&albumID=800522&imageID=7562177

I think she is one semester at college away from being a fat chick. She is at the upper limit of the thick girl/fat girl right now.

[Niner]

Everyone on the forums recommends a VB and gauges first. but I really want the MPG savings asap .... hmmmm what to do what to do

I don't have gauges and haven't blown anything up yet. You don't need gauges unless you are hard core towing (8,000#'s and up) with the chip on a 60HP+ tune.

[Niner]

Snagged a couple of the little tiedown covers on the bed rails to replace the 2 that I am missing.

[scott3824]

tell her shes gonna be poor for a few years if she doesnt go for the vfw idea.

no. I"M gonna be foor for quite a few years :tolietmon

[scott3824]

I don't have gauges and haven't blown anything up yet. You don't need gauges unless you are hard core towing (8,000#'s and up) with the chip on a 60HP+ tune.

That is my rationale as well. I will probably get the chip with the 80hp economy, it will have the smoke setting too but i wont really use it ... sweet ... so Valve bodie and chip ... then i need to get lacey to buy me the oil bypass filter setup ....

[scott3824]

Why I run steel or better ...

http://www.the-nags.com/county_line_show/034.jpg

[scott3824]

You have completed your route to Yucca Mountain on time. You collected $233.45 of which Utopia Inc. collected $14.01 from that total to leave you with a total collection of $219.44. Your driver rating is now 3.89.

[Niner]

Why I run steel or better ...

http://www.the-nags.com/county_line_show/034.jpg

Maybe if whoever owns that bike lubed theuir chain once a year and adjusted it properly that wouldn't happen. You can see several frozen links.

[ScottFuries]

You have completed your route to Las Vegas on time. You collected $836.58 of which Utopia Inc. collected $50.19 from that total to leave you with a total collection of $786.38. Your driver rating is now 6.92. You would have a driver rating of 20 if you didnt speed and carry loads exceeding the legal limit.

[Niner]

You have completed your route to Yucca Mountain on time. You collected $233.45 of which Utopia Inc. collected $14.01 from that total to leave you with a total collection of $219.44. Your driver rating is now 3.89.

First time ever on time?

[scott3824]

First time ever on time?

na i snuck a few in

[scott3824]

Maybe if whoever owns that bike lubed theuir chain once a year and adjusted it properly that wouldn't happen. You can see several frozen links.

yes maintenance helps. but you cant change the coefficient of friction between steel/steel and steel/aluminum .... if that was a steel sprocket the teth would be fine

[Zuki750]

if that was a steel sprocket the teth would be fine
and the chain would be fucked. Sprockets are cheaper than chains.

[scott3824]

and the chain would be fucked. Sprockets are cheaper than chains.

How do you figure?

The most common problem with chains is the stretch. You will get less stretch with a steel sprocket. The repeated pulling on the chain and chain adjustments causes the chain's subcomponents to physically elongate, and the distance between any two roller surfaces increases. The distance between teeth on the sprocket doesn't elongate the same way, and the result is that only one roller is taking the majority of the force from a sprocket at any given time, instead of sharing it equally among the rollers in contact at that instant. This causes the chain to elongate and to wear at an even higher rate, and causes the sprocket teeth to start wearing unevenly (forming the typical wave pattern). With a stronger sprocket this will happen slower, as well as the steel or TI sprocket won't fail due to the chain like an aluminum one would.

[scott3824]

Why do you think sprockets from the factory are steel?

[Zuki750]

The rollers on the chain have to wear. I'd think they'd wear less up against aluminum than steel.

The factory uses steel because it is cheaper. They could care less about how long the chain and sprocket last.

[scott3824]

The distance between the roller bearings increases because the pins and housings holding them together wear. A steel sprocket won't cause this to happen any faster.

Once a chain starts stretching the trailing edge of the sprocket teeth receive the majority of the wear, this increases faster on aluminum sprockets.

[Niner]

yes maintenance helps. but you cant change the coefficient of friction between steel/steel and steel/aluminum .... if that was a steel sprocket the teth would be fine
How does the coefficient of friction between the chain rollers and the sprocket have to do anything with sprocket wear. Isn't that why the chain has rollers in the first place?
How do you figure?

The most common problem with chains is the stretch. You will get less stretch with a steel sprocket. The repeated pulling on the chain and chain adjustments causes the chain's subcomponents to physically elongate, and the distance between any two roller surfaces increases. The distance between teeth on the sprocket doesn't elongate the same way, and the result is that only one roller is taking the majority of the force from a sprocket at any given time, instead of sharing it equally among the rollers in contact at that instant. This causes the chain to elongate and to wear at an even higher rate, and causes the sprocket teeth to start wearing unevenly (forming the typical wave pattern). With a stronger sprocket this will happen slower, as well as the steel or TI sprocket won't fail due to the chain like an aluminum one would.
Where is your data to support this? I don't take anyones theory on what is happening unless they tell me their theory on what is hapening, the specifice test set up they used, how they gathered the dats, and what the results are. For example. I say the sky is blue because the sky reflects the color of the oceans that cover 2/3 of the worlds surface. It makes intuitive sense, but is still dead wrong.


Why do you think sprockets from the factory are steel?

The rollers on the chain have to wear. I'd think they'd wear less up against aluminum than steel.

The factory uses steel because it is cheaper. They could care less about how long the chain and sprocket last.

Yup.

[Niner]

yes maintenance helps. but you cant change the coefficient of friction between steel/steel and steel/aluminum .... if that was a steel sprocket the teth would be fine

http://www.engineersedge.com/coeffients_of_friction.htm

So more friction makes it wear slower?


Aluminum on Steel=0.45
Steel on steel=0.80

[scott3824]

How much more of an explanation of my theory do you want?

I'm not sitting here typing "steel hard aluminum soft"

Where is the data to disprove my theory?

[scott3824]

http://www.engineersedge.com/coeffients_of_friction.htm

So more friction makes it wear slower?


Aluminum on Steel=0.45
Steel on steel=0.80

If you simply rubbed the two together then yes I would be wrong. But you know better than that. The rollers don't wear away. The chain stretches and the distance between the rollers becomes greater. Maybe the coefficient of friction isn't that important in this discussion as I thought. A chain is also lubed, so CoF of 2 dry metals is not an accurate basis either.

[scott3824]

How does the coefficient of friction between the chain rollers and the sprocket have to do anything with sprocket wear. Isn't that why the chain has rollers in the first place?
.

Just saw you said what your other statement made me re-evaluate :ese:

[Niner]

If you simply rubbed the two together then yes I would be wrong. But you know better than that. The rollers don't wear away. The chain stretches and the distance between the rollers becomes greater. Maybe the coefficient of friction isn't that important in this discussion as I thought. A chain is also lubed, so CoF of 2 dry metals is not an accurate basis either.

Steel wears better than aluminum. But it also wears the chain more. It's a trade off.

[MikeM]

Why I run steel or better ...


i refuse to believe that nags would let his chain get that bad

look at the frozen links.. i dont even let my shit get that bad

that would ruin a steel sprocket almost as quick, if it didnt then it would be grinding away at the rollers. that chains bad news

[MikeM]

ok i see you guys already had this discussion

[MikeM]

yes maintenance helps. but you cant change the coefficient of friction between steel/steel and steel/aluminum .... if that was a steel sprocket the teth would be fine

if the chain isnt shot, there is no friction, except whatevers going on inside the rollers. thats not relevant to this (already past) discussion

[Zuki750]

All you fuckers have today off, don't you.

[Niner]

All you fuckers have today off, don't you.

Just woke up. If it makes you feel better I have to work a few hours tomorrow.

[MikeM]

is today good friday or something?

[Zuki750]

is today good friday or something?
Yes.

Anybody ever use the Safari web browser? I'm kinda liking it.

[Niner]

Truck just smoked another rotor. I think I might just replace the rotors and pads all the way around. Fuck, guess I will still owe a couple bucks on the DRZ in July. Maybe my second job will pick up and I can get some side income coming in.

[Niner]

Good to know:
http://www.snopes.com/politics/taxes/stimulus.asp

[Niner]

Truck just smoked another rotor. I think I might just replace the rotors and pads all the way around. Fuck, guess I will still owe a couple bucks on the DRZ in July. Maybe my second job will pick up and I can get some side income coming in.

Fucking stuck slide pins. Scooter, make sure you grease up your slide pins if you ever work on your brakes.

[MikeM]

All you fuckers have today off, don't you.

i dont normally

[MikeM]

Yes.

Anybody ever use the Safari web browser? I'm kinda liking it.

is it mozilla based?

[Zuki750]

is it mozilla based?
No idea. I've only used IE.

[Niner]

The rotor, slide pin grease, a little mirro for my DRZ, scotch bright pad, and a set of front brake pads was only $80. Guess it is a lot cheaper if you don't destroy the caliper. Shit the rotor was only $45 and there has to be almost worth that in scrap value. Fucker is like 50 or 60 pounds.

[Niner]

Montgomery/jacksonville make a nice loop. Short and you can haul milk to jacksonville for 90 cents a mile. Rocks are going to end quick once people figure this out.

[MikeM]

Montgomery/jacksonville make a nice loop. Short and you can haul milk to jacksonville for 90 cents a mile. Rocks are going to end quick once people figure this out.

its already been posted on utopia

i just dropped off my second load and im goin back for thirds in a couple hours

also changed my home to montgomery

[MikeM]

Current Max Truck Condition: 96.8% (for standard repairs)

might be buying a charger sometime soon

[Zuki750]

I'm buying a new truck soon. What the hell, it's only fake money.

[Zuki750]

Niner, what the fuck are you saving for? You got a ton of dough.

[Niner]

its already been posted on utopia

i just dropped off my second load and im goin back for thirds in a couple hours

also changed my home to montgomery
I change my home town too.
I'm buying a new truck soon. What the hell, it's only fake money.
+1
Niner, what the fuck are you saving for? You got a ton of dough.

A new truck. I have to sell all my stokz first. It's going to take me a while to sell them all.

[Miss Chievous]

happy easter all!

[Zuki750]

I change my home town too.

+1


A new truck. I have to sell all my stokz first. It's going to take me a while to sell them all.
What are you buying? You already have a bunch of money. Don't go for the top dog. Then you have nothing to work toward.

[MikeM]

I'm buying a new truck soon. What the hell, it's only fake money.

i hear that

ive been thinking about buying every single truck in order of course. just for the hellll of it

[MikeM]

I change my home town too.


montgomery seemed like a good place since ive already been there twice and i'll be there again probably 2-3 more times

[Niner]

What are you buying? You already have a bunch of money. Don't go for the top dog. Then you have nothing to work toward.
Whatever I have the money for when I finally get all my stokz sold. I can work towards the triple.

montgomery seemed like a good place since ive already been there twice and i'll be there again probably 2-3 more times

Word.

[Niner]

Ghostride your whip:
http://www.collegehumor.com/video:1807849

[Niner]

I keep selling $500 of utopia stock a day, but the value is going up so fast my total $ amount keeps going up.

[MikeM]

happy easter all!

happy easter hooker ho

[Zuki750]

This is where I usually go snowmobiling.


From beginning of the 2007-2008 snowfall season through midnight March 20, 2008, the National Weather Service in Caribou, ME has recorded 182.5 inches of snowfall. This morning's measurement (21 March) puts the total at 184.5 inches. This seasonal snowfall total is the greatest amount ever, since records began in 1939. The previous record of 181.1 inches was set in the 1954-1955 snowfall season.

184.5 inches equals 15 feet, four and one-half inches.

Should Caribou continue to see additional snowfall at the normal climatological pace for the remainder of March, April and May, Caribou would end the 2007-2008 snow season with 200.8 inches of snowfall or 16 feet, 8 and 13/16 inches.

[MikeM]

I keep selling $500 of utopia stock a day, but the value is going up so fast my total $ amount keeps going up.
you say that like its a bad thing

[MikeM]

This is where I usually go snowmobiling.

how long into summer will that snow last?

and just think how overflowing every river there is is gonna be all spring

[Niner]

how long into summer will that snow last?

and just think how overflowing every river there is is gonna be all spring

Rafting time.:yes:

[Zuki750]

how long into summer will that snow last?

and just think how overflowing every river there is is gonna be all spring

The snow usually lasts until the end of april. This year, the snow banks will be around into june.

[MikeM]

one leg away from delivering my 4th load of rocks

81 miles to go
speed limit 75

very tempting but i dont think im gonna go for it

[scott3824]

damn
forgot to drive last night

[scott3824]

working today .... server upgrades

[scott3824]

we got a ton of snow last night ... wtf it was 55 the other day

[Miss Chievous]

we got a ton of snow last night ... wtf it was 55 the other day
another reason why i love the sunshine state

[scott3824]

another reason why i love the sunshine state


It's humid and has too many immigrants and old people.

[Niner]

one leg away from delivering my 4th load of rocks

81 miles to go
speed limit 75

very tempting but i dont think im gonna go for itI'm not going to catch a 3rd load. I'd go for it without thinking twice.

damn
forgot to drive last nightBig shocker.

working today .... server upgrades
I went in for an hour and a half. Waste of my time.
we got a ton of snow last night ... wtf it was 55 the other day
It's melting pretty quick.
It's humid and has too many immigrants and old people.
And criminals.

[Zuki750]

Year: 2007
Make: Volvo
Model: VN670
Purchase Cost: $58,500.00
Current Value: $55,575.00
Odometer: 13,000 Miles
Legal Load Limit: 41,000 lbs. (maximum hauling weight before penalties)
Truck Load Limit: 61,110 lbs. (maximum hauling weight for truck)
Overhaul Truck Condition: 97.0% (best overhaul condition)
Current Max Truck Condition: 97.0% (for standard repairs)
Current Truck Condition: 97.0%
Top Speed: 93 MPH
Miles Per Gallon: 9.98 MPG
Fuel Capacity: 240 Gallons

Driver Items: Air Filter, CB Radio, Fog Lights, Fuel Filter, Fuel Injector, Aluminum Wheels,

[scott3824]

damn get it zuki

[scott3824]

is it mozilla based?

it's the standard browser for the mac ...

[Miss Chievous]

It's humid and has too many immigrants and old people.

the old people are fun. the younger crowd definitely outweighs the old people. they tend to stick to the beach areas. as for immigrants, get cultured! sheesh. haha. and yes its humid, but i'd take the humidity or snow any day of the week.

[Niner]

the old people are fun. the younger crowd definitely outweighs the old people. they tend to stick to the beach areas. as for immigrants, get cultured! sheesh. haha. and yes its humid, but i'd take the humidity or snow any day of the week.

Illegal mexicans picking oranges isn't culture.

[MikeM]

tampa is actually pretty white

the east coast where my grandmother lives isnt

[Zuki750]

and St. Pete is the home of Scientology.

[ScottFuries]

powdercoated shit looks rad.
im bringing more to get done.

[MikeM]

powdercoated shit looks rad.
im bringing more to get done.

PICS


or die

[MikeM]

Contracts change tonight at 1
Cargos change tonight at 2

Jacksonville - Florida - USA
Supplies: Glass, Rock
Demands: Appliances, Milk

Go to Jacksonville, hook up a load of glass to Atlanta
This is a very short bonus demand route that pays 1.36 with the company bonuses.
Dont leave town yet
At 1 the contracts change, and the only big one is rocks. Theyll definitely be bidding on it

[MikeM]

If they get it, ditch the glass

[Zuki750]

I can't believe they did away with Stockz. That was the easy way for Niner to sell all his.

[Niner]

I can't believe they did away with Stockz. That was the easy way for Niner to sell all his.

I am happy. New truck tonight!

[Niner]

Scooter:

The slide pins can be very problematic on this vehicle between 99 and 04. If you generate a lot of heat, it can be easy to cook the upper boot and have issues in a short time. Or if the brakes are worked on, not have the boots fully seated.

I usually recommend that people check the slides every year or two just to avoid the expense that you've gone through.

The pin / boots have been through 3 stages of modifications. The last one with the O-Ring is to provide some slide resistance, just as the original design had. (The first series was like the rear boots, internally mounted in the caliper brackets). To me, it wasn't all that necessary.

But if you had trouble getting the pin and O-Ring in, there still must have been some rust build-up in the bracket pin bore. I use a ball hone to clear them out. But use silicon caliper slide grease, not petroleum based grease. Pet based will cause the boots to swell a little, losing the seal at the ends.

For pads, I recommend the Performance Friction Z pads. A little higher friction, more rotor abrasion, good noise suppression, and good wear life.

I use the OE rotors (not Motorcraft). Dealers have both. But a high priced rotor from other parts stores are also OK. The OE rotor is going to have the best machining. Slotted rotors will not get you anything, unless your using the OE pads. As people more to PF or Hawk pads, they have a higher metallic content and do not gas as much. You need the slots for gassing at high temps.

Frozen rotors - if you feel the need. Get the rotors hot enough and the treatment goes away so it's a waste of time.

I've 100k on my F-350 with PF pads, OE rotors, and no pulsation. But my slides work well. They were just checked two weeks ago.

You may find it easier to get rebuilt calipers then rebuilding them. Also make sure the pads move freely in the brackets. Sometimes the aftermarket pads have extra paint or burrs on they and the pads hang up a little. The effect is the same as having the pins rust up.

[Alie]

Happy Easter truckers.

[Niner]

The easter bunny left me some shit:
Driver Items: Air Filter, CB Radio, Fresh Tires, Fog Lights, Fuel Filter, Fuel Injector, Radar Detector, Tool Box, Aluminum Wheels, Warning Lights, High Gear Ratio, GPS Navigation, Extra Fuel Tank,
TruckDetails
Year: 2008
Make: Freightliner
Model: C120
Purchase Cost: $72,000.00
Current Value: $69,120.00
Odometer: 500 Miles
Legal Load Limit: 41,000 lbs. (maximum hauling weight before penalties)
Truck Load Limit: 59,740 lbs. (maximum hauling weight for truck)
Overhaul Truck Condition: 98.0% (best overhaul condition)
Current Max Truck Condition: 100.0% (for standard repairs)
Current Truck Condition: 98.0%
Top Speed: 101 MPH
Miles Per Gallon: 10.73 MPG
Fuel Capacity: 305 Gallons

[MikeM]

NICE!!!!

go top it out

[MikeM]

Rating: 24.36

Tomorrow's my big day

[beckybBITCHES]

today is the day they're suppose to go to court to raise my child support :thumbsup

[Zuki750]

Alright, I'm in Atlanta. Where to next?

[Zuki750]

I'm headed back to Jacksonville for glass right now.

[scott3824]

fuck a wedding guest list

[Zuki750]

fuck a wedding guest list
That's one of the worst parts. We were planning a small wedding and it turned into 125 guests.

[MikeM]

I'm headed back to Jacksonville for glass right now.

+1

i hate to admit it but im thinking about joining CF so i can get in on some contracts

[Zuki750]

This week is going to drag so bad. Last thursday I booked a trip to florida for April 1st. I can't wait for some warm weather and I can still snowmobile when I get home.

[Zuki750]

+1

i hate to admit it but im thinking about joining CF so i can get in on some contracts
Where are you taking glass? Are you headed for some clothes?

[MikeM]

Where are you taking glass? Are you headed for some clothes?

back to atlanta i think. then probably to houston

[Zuki750]

back to atlanta i think. then probably to houston
It's only giving me the bonus if I head to a terminal that needs glass. Maybe the $4-500 level are this way.

[scott3824]

That's one of the worst parts. We were planning a small wedding and it turned into 125 guests.

Shit, I'm just trying to get down to 180 so we can get the cheaper room .... this shits gonna bankrupt me :homer

[MikeM]

It's only giving me the bonus if I head to a terminal that needs glass. Maybe the $4-500 level are this way.

that is correct. bonuses only apply to demand routes

[MikeM]

Shit, I'm just trying to get down to 180 so we can get the cheaper room .... this shits gonna bankrupt me :homer

DOWN to 180 HOLY SHIT. you sir are fucked. your wifes gonna keep you poor for the rest of your life

[scott3824]

DOWN to 180 HOLY SHIT. you sir are fucked. your wifes gonna keep you poor for the rest of your life

mother & father side of family for both of us, figure about 30 people on average each, thats 120 alone ... it's not her its just inevitable, gotta have friends there too - they are what actually make it fun

[scott3824]

mike, would you and becky actually come ?

I've decided that if i can get people's responses ahead of time it will allow me to save on $ for invitations and get a more accurate number.
I know niner will be here drunkingly cock blocking himself.
Oh yeah looks like teh date is sept 13th ... same weekend as xdl indy ...

[MikeM]

back to atlanta i think. then probably to houston

It's only giving me the bonus if I head to a terminal that needs glass. Maybe the $4-500 level are this way.


oh

glass to charlotte - $1.64 a mile. 400 miles

[MikeM]

mike, would you and becky actually come ?

I've decided that if i can get people's responses ahead of time it will allow me to save on $ for invitations and get a more accurate number.
I know niner will be here drunkingly cock blocking himself.
Oh yeah looks like teh date is sept 13th ... same weekend as xdl indy ...

we would go for sure, but dont feel like you need to invite us. we're not gonna feel hurt or left out if you cant invite us.

[MikeM]

oh

glass to charlotte - $1.64 a mile. 400 miles

no good routes out of charlotte tho. think im gonna loop this one a few times

[Zuki750]

that is correct. bonuses only apply to demand routes
I was getting the $200 bonus for glass to Atlanta last week. I don't think that was a demand route.

[MikeM]

I was getting the $200 bonus for glass to Atlanta last week. I don't think that was a demand route.

it was until last night. definitely

[Niner]

DOWN to 180 HOLY SHIT. you sir are fucked. your wifes gonna keep you poor for the rest of your life

Wife, truck and bikes.

[scott3824]

might have to sell the bikes for this one

[Niner]

mike, would you and becky actually come ?

I've decided that if i can get people's responses ahead of time it will allow me to save on $ for invitations and get a more accurate number.
I know niner will be here drunkingly cock blocking himself.
Oh yeah looks like teh date is sept 13th ... same weekend as xdl indy ...
You know it. Got any rich uncles? Might end up making $ on the wedding.

[Niner]

might have to sell the bikes for this one

How much you want for the 954?:ese:

[Niner]

scott:
The slide pins can be very problematic on this vehicle between 99 and 04. If you generate a lot of heat, it can be easy to cook the upper boot and have issues in a short time. Or if the brakes are worked on, not have the boots fully seated.

I usually recommend that people check the slides every year or two just to avoid the expense that you've gone through.

The pin / boots have been through 3 stages of modifications. The last one with the O-Ring is to provide some slide resistance, just as the original design had. (The first series was like the rear boots, internally mounted in the caliper brackets). To me, it wasn't all that necessary.

But if you had trouble getting the pin and O-Ring in, there still must have been some rust build-up in the bracket pin bore. I use a ball hone to clear them out. But use silicon caliper slide grease, not petroleum based grease. Pet based will cause the boots to swell a little, losing the seal at the ends.

For pads, I recommend the Performance Friction Z pads. A little higher friction, more rotor abrasion, good noise suppression, and good wear life.

I use the OE rotors (not Motorcraft). Dealers have both. But a high priced rotor from other parts stores are also OK. The OE rotor is going to have the best machining. Slotted rotors will not get you anything, unless your using the OE pads. As people more to PF or Hawk pads, they have a higher metallic content and do not gas as much. You need the slots for gassing at high temps.

Frozen rotors - if you feel the need. Get the rotors hot enough and the treatment goes away so it's a waste of time.

I've 100k on my F-350 with PF pads, OE rotors, and no pulsation. But my slides work well. They were just checked two weeks ago.

You may find it easier to get rebuilt calipers then rebuilding them. Also make sure the pads move freely in the brackets. Sometimes the aftermarket pads have extra paint or burrs on they and the pads hang up a little. The effect is the same as having the pins rust up.

[scott3824]

How much you want for the 954?:ese:

4k and its yours (painted and all)

[beckybBITCHES]

mike, would you and becky actually come ?

I've decided that if i can get people's responses ahead of time it will allow me to save on $ for invitations and get a more accurate number.
I know niner will be here drunkingly cock blocking himself.
Oh yeah looks like teh date is sept 13th ... same weekend as xdl indy ...

we would definately come....probaly with kids though. anyways, don't worry about sending an invitation to us....do whatever you can to save money. weddings are kinda tricky....is her family going to help out with any costs? it's also cheaper to order invitations online than doing it with a company....also look into making your own, like print and scan them yourselves...all you have to buy is the fancy paper. also with the head count of everyone you guys invite, the rule of thumb is 1/3 of that won't show.....but sometimes they still do...i've seen weddings where hardly anyone that was invited didn't show and then i've seen weddings had everyone show up and they had to make numerous beer runs.

[scott3824]

damn niner that sucks about your brakes ... wish i had the loot to do the rotors and pads and rebuilt calieprs

[scott3824]

4k and its yours (painted and all)

SI race rails, 1krr handbrake :ese:

[Niner]

4k and its yours (painted and all)
Maybe this summer when I get some shit paid off and you get it off the milk crate.:ese: What color is it getting painted and how many miles does it have?
everyone show up and they had to make numerous beer runs.
WTF?
damn niner that sucks about your brakes ... wish i had the loot to do the rotors and pads and rebuilt calieprs

I'm going to let it run with what I have now and go with the guys recomendations later on.

[scott3824]

we would definately come....probaly with kids though. anyways, don't worry about sending an invitation to us....do whatever you can to save money. weddings are kinda tricky....is her family going to help out with any costs? it's also cheaper to order invitations online than doing it with a company....also look into making your own, like print and scan them yourselves...all you have to buy is the fancy paper. also with the head count of everyone you guys invite, the rule of thumb is 1/3 of that won't show.....but sometimes they still do...i've seen weddings where hardly anyone that was invited didn't show and then i've seen weddings had everyone show up and they had to make numerous beer runs.

wasnt sure if it was too far of a drive and with you guys trying to get moved out there etc .... like i know soem of my family across the country wont be able to make it cause its too far ... the wedding planenr told us to figure about 83% will show. we are cutting corners everywhere else or trying but the reception part seems unavoidable ...

[Niner]

SI race rails, 1krr handbrake :ese:

Adapter? Undertail bar?

[beckybBITCHES]

wasnt sure if it was too far of a drive and with you guys trying to get moved out there etc .... like i know soem of my family across the country wont be able to make it cause its too far ... the wedding planenr told us to figure about 83% will show. we are cutting corners everywhere else or trying but the reception part seems unavoidable ...

is the hotel having the reception for you? or do you have a hall?


if you're having it at a hall where you can bring in your own food and drinks or pick your own caterer let me know, i could help you do all of that cheap....if you're having the hotel doing it you're done for lol

[beckybBITCHES]

at weddings in kansas it's nothing out of the ordinary to see people wear jeans......is that how it is in ohio?

[Zuki750]

at weddings in kansas it's nothing out of the ordinary to see people wear jeans......is that how it is in ohio?
It's not even that way in Maine.

[Niner]

at weddings in kansas it's nothing out of the ordinary to see people wear jeans......is that how it is in ohio?

It's not even that way in Maine.

Exactly.:lobster:

[Niner]

Adapter? Undertail bar?

Damper?:teacher:

[beckybBITCHES]

soooo, i just went outside of my room to find austin's gameboy games chewed up...grrrrrrrrrrrr....they were on the living room table...i understand that they should've been in his room, but come on...also...the dog pooped and peed on the living room floor....i'm giong to leave before my dad comes back so he will see and hopefully agree with me that the dog needs some sort of kennel when he or my brother isn't going to be here...figuring it's their dog, not mine.

assholes

[beckybBITCHES]

it stinks so bad in the leaving room....i might throw up when i go back in there

[beckybBITCHES]

do you guys think it's gay if i put austin in a break dancing class?

[Niner]

soooo, i just went outside of my room to find austin's gameboy games chewed up...grrrrrrrrrrrr....they were on the living room table...i understand that they should've been in his room, but come on...also...the dog pooped and peed on the living room floor....i'm giong to leave before my dad comes back so he will see and hopefully agree with me that the dog needs some sort of kennel when he or my brother isn't going to be here...figuring it's their dog, not mine.

assholes

That fucking sucks. How many games did he get?

[Niner]

do you guys think it's gay if i put austin in a break dancing class?

It's midwest ghetto fabulous.

[beckybBITCHES]

That fucking sucks. How many games did he get?

austin has 2 games left....out of 12.

it's not the dogs fault...1. austin should've put them back in his room
2. my dad needs a cage to put him in or a crate or something when he's not going to be here....i feel kinda bad because my dad is going to beat his ass when he gets home because he shit and pissed in the house....not his fault, he's still a puppy

[beckybBITCHES]

It's midwest ghetto fabulous.

i tihnk it would be neat to see him break dance...not too many little kids can do it.

[Zuki750]

Dogs need to be kennel trained. Letting a puppy roam the house is asking for this sort of thing.

[Niner]

austin has 2 games left....out of 12.

it's not the dogs fault...1. austin should've put them back in his room
2. my dad needs a cage to put him in or a crate or something when he's not going to be here....i feel kinda bad because my dad is going to beat his ass when he gets home because he shit and pissed in the house....not his fault, he's still a puppy
Damn, that sucks. He needs to be crated or you need to watch him when you are the only one there.
i tihnk it would be neat to see him break dance...not too many little kids can do it.

...until he starts talking like Malibu's most wanted.

[beckybBITCHES]

Dogs need to be kennel trained. Letting a puppy roam the house is asking for this sort of thing.

that's what i'm saying....my dad is retarded

[Niner]

that's what i'm saying....my dad is retarded

Either that or it needs to live outside 100% of the time.

[beckybBITCHES]

he's a bulldog, someone has said stuff about if they're outside for too long they'll get sunburnt or something like that

[beckybBITCHES]

what sucks is my mom just bought him a nintendo ds for his birthday next week...his gameboy games could've worked in it...now i have to take him to that stupid gamestop place and start all over with games...grrr

[beckybBITCHES]

niner guess what. i'm going to long island the weekend/week of april 15th to take a test to get into lpn school...this time the test is high school english/algebra...i'm kinda nervous, but mike's mom bought me some cheat books

[Niner]

he's a bulldog, someone has said stuff about if they're outside for too long they'll get sunburnt or something like that
Build him a dog house.
what sucks is my mom just bought him a nintendo ds for his birthday next week...his gameboy games could've worked in it...now i have to take him to that stupid gamestop place and start all over with games...grrr
Guilt your dad into replacing them.
niner guess what. i'm going to long island the weekend/week of april 15th to take a test to get into lpn school...this time the test is high school english/algebra...i'm kinda nervous, but mike's mom bought me some cheat books

Do work. Should be about the same as the tests out in Kansas.
71=2x+7 What does X=? Shit like that.

[scott3824]

is the hotel having the reception for you? or do you have a hall?


if you're having it at a hall where you can bring in your own food and drinks or pick your own caterer let me know, i could help you do all of that cheap....if you're having the hotel doing it you're done for lol

the hotel ... 1 stop shop ... i priced it out and it's about the same if we were to rent a hall and have it catered and hire bartenders and buy liquor and get a cake and get center pieces etc ... plus there is a bar onsite open until 2 am so no one has to drive or walk anywhere and the hotel is just finishing up getting remodeled, it is so sweet inside ....

[scott3824]

at weddings in kansas it's nothing out of the ordinary to see people wear jeans......is that how it is in ohio?

never seen anyone in jeans at a wedding ....

[scott3824]

Damper?:teacher:

i had a damper unless borne stole it, he took it and put it on his 929 at one point

[Niner]

i had a damper unless borne stole it, he took it and put it on his 929 at one point

Undertail bar? HB adapter or FT rear master? Miles, gearing, color?

[scott3824]

i tihnk it would be neat to see him break dance...not too many little kids can do it.

it would be cool if he hooked up with some asians and went on a competition on mtv and won some shit for beeing americas best dance crew .... but it wouldnt be cool if he started hanging around with girls in dance class and then came home and asked to take ballet ...

[MikeM]

Undertail bar? HB adapter or FT rear master? Miles, gearing, color?

you could definitely use another bike

[scott3824]

Undertail bar? HB adapter or FT rear master? Miles, gearing, color?

adapter, i dont think i have a bar, black/red/white, not sure on the miles

[scott3824]

you could definitely use another bike

shhhh :whoopass

[Zuki750]

I bought an iPod Nano on saturday. Man are these things tiny. It's quite different from my first generation iPod.

[Niner]

you could definitely use another bike
It would complete the stable of bikes I never ride.:thumbsup
adapter, i dont think i have a bar, black/red/white, not sure on the miles
Swap the red for blue.:ese:
shhhh :whoopass

4g's isn't too bad of a price. Better than the 5's ti mmy thinks he can get for his bad juju 954.

[Niner]

adapter, i dont think i have a bar, black/red/white, not sure on the miles

get a bar.:ese:

[MikeM]

I bought an iPod Nano on saturday. Man are these things tiny. It's quite different from my first generation iPod.

I still dont have one

[Niner]

I still dont have one

I might buy one this christmas. I got like 30 gigs of music on my computer.

[scott3824]

can't believe the fed allowed the sirius xm merger to happen

[Alie]

i never quite understood why people living in areas where they don't really commute need ipods.

i only got my ipod after i was forced to take public transportation. Now that I'm in NJ and I drive more, I only use it at the gym when i want to avoid communication.

[Niner]

i never quite understood why people living in areas where they don't really commute need ipods.

i only got my ipod after i was forced to take public transportation. Now that I'm in NJ and I drive more, I only use it at the gym when i want to avoid communication.

Road trips.

[Zuki750]

can't believe the fed allowed the sirius xm merger to happen
I can't believe it took so long to approve it. Exxon/Mobile merged in like 6 months. The satellite companies merging is actually good for the consumer, unlike the oil companies.

[scott3824]

I can't believe it took so long to approve it. Exxon/Mobile merged in like 6 months. The satellite companies merging is actually good for the consumer, unlike the oil companies.

i miss my sirius :tolietmon

[scott3824]

i never quite understood why people living in areas where they don't really commute need ipods.

i only got my ipod after i was forced to take public transportation. Now that I'm in NJ and I drive more, I only use it at the gym when i want to avoid communication.

they are good for pooping at work so you dont have to listen to anyone elses BG's explode

[Zuki750]

i never quite understood why people living in areas where they don't really commute need ipods.

i only got my ipod after i was forced to take public transportation. Now that I'm in NJ and I drive more, I only use it at the gym when i want to avoid communication.
I use mine in my car, snowmobiling, snowboarding, on my bike, mowing the lawn, working around the house, etc.

[Niner]

mowing the lawn, .

Mental image I get: A ride-on mower with a beer cooler and cup holder. LOL

[Zuki750]

Mental image I get: A ride-on mower with a beer cooler and cup holder. LOL
My cup holder broke. It didn't like the 22oz bottle. I knew I should have stuck to cans.

[scott3824]

damn i still want a riding mower

[Niner]

My cup holder broke. It didn't like the 22oz bottle. I knew I should have stuck to cans.

LOL I knew it. Fab one up out of steel that holds a 40oz.

[MikeM]

Electronics from charlotte to STL pays .71

[MikeM]

I use mine in my car, snowmobiling, snowboarding, on my bike, mowing the lawn, working around the house, etc.

thats when she uses her cell phone

[MikeM]

damn i still want a riding mower

if you had a fence, id say buy a goat

[Niner]

if you had a fence, id say buy a goat

The city would fine him for having an unzoned animal.:ese:

[Niner]

Hauling 41000 pounds of Clothing from El Paso to Phoenix will earn your driver $1.84 per mile, a total of $761.55 for the entire route. If you are late you will be fined $250.00 per day that you are late.

[scott3824]

if you had a fence, id say buy a goat

then my grass would look like shit

[scott3824]

The city would fine him for having an unzoned animal.:ese:

ahahahaha i'm dying ... so true .... thank you for making me smile

[Zuki750]

Electronics from charlotte to STL pays .71
What's in STL?

[scott3824]

i'm in atl .... mike hook me up with a route

[MikeM]

Hauling 41000 pounds of Clothing from El Paso to Phoenix will earn your driver $1.84 per mile, a total of $761.55 for the entire route. If you are late you will be fined $250.00 per day that you are late.

word thats a lot of money

[MikeM]

What's in STL?

not much. its just a demand route from charlotte

[scott3824]

should i go for the 2001 Volvo VN660 or wait $15k more for the 2004 Volvo VN670

[MikeM]

i'm in atl .... mike hook me up with a route

you could go to jax and bring glass to charlotte

the only close demand route i see from atl is to houston

houston back to atlanta pays real well

[scott3824]

Ok I got a server built today and the hpux cell manager patched (170 patches!) .... productive enough for me ....

[Zuki750]

I'm outta here.

[ScottFuries]

Top Truck Speed: 95 MPH

hammer down

[MikeM]

Ok I got a server built today and the hpux cell manager patched (170 patches!) .... productive enough for me ....

170 patches holy shit thats the kind of shit youd expect from microsuck

[Miss Chievous]

wasnt sure if it was too far of a drive and with you guys trying to get moved out there etc .... like i know soem of my family across the country wont be able to make it cause its too far ... the wedding planenr told us to figure about 83% will show. we are cutting corners everywhere else or trying but the reception part seems unavoidable ...

my sister's wedding is in July. they are having the same issues with the guest list. They went down from 155 to 125 but said it was hard and 75% of the people are on our side of the family so my sister's fiance asked her to cut it down some. They are trying to save money by only have 3 hours of open bar instead of 5 hours and by picking flowers for the wedding that are in season. I was amazed at how much money you can save just buy choosing different flowers.

[Niner]

Hrrrm....A WVO system pays itself off in just 13,500-14,500 miles of driving on veggie oil... That's under 1 year. If I can figure out a good place to put a tank (not in the bed), I might look into this.

[Zuki750]

101 mph, I should test this bitch out.

[Niner]

101 mph, I should test this bitch out.

I'm afraid to.

[warbuk]

101 mph, I should test this bitch out.

f1fiddy, straight6 104mph:bowdown

[Zuki750]

I'm afraid to.

I'm testing her out first thing in the morning.

[MikeM]

I'm testing her out first thing in the morning.

YES!!!! :jaman

[Zuki750]

You received a ticket on your last leg for Speeding at 101 MPH in a 65 MPH zone. You must pay your ticket fines before moving on.

http://voyager.umeres.maine.edu/~jason_light/ticket.jpg

[Zuki750]

Miles Per Gallon: 10.64 MPG

[beckybBITCHES]

slow down zuki

[Niner]

http://voyager.umeres.maine.edu/~jason_light/ticket.jpg

And that's why I am afraid.

[scott3824]

haha 400 damn

[Zuki750]

People want to shit on Mike.

http://www.stuntusa.com/forums/showthread.php?t=36705

[scott3824]

damn I got the BG's this morning

[MikeM]

People want to shit on Mike.

http://www.stuntusa.com/forums/showthread.php?t=36705

that was pretty insane

[Zuki750]

Fuck an enclosed trailer. I want this bitch.

http://www.hardcoresledder.com/forums/index.php?showtopic=331581

[MikeM]

Fuck an enclosed trailer. I want this bitch.

http://www.hardcoresledder.com/forums/index.php?showtopic=331581

14' garage with a electric lift gate

does it have 4wd?

[Niner]

14' garage with a electric lift gate

does it have 4wd?

It's so heavy all it would ever need is chains.


Remember the smaller KTM version with the blown motor I posted up about a year ago?

[Zuki750]

14' garage with a electric lift gate

does it have 4wd?
I highly doubt it.

[Niner]

14' garage with a electric lift gate

does it have 4wd?

Mike:Sorry Becky, but I bought a place and it isn't the one you were looking at.

Becky: Well where is this place?

Mike:It's parked out front...

[MikeM]

I think I might be due for a new truck soon. Max condition is now below 95% and its dropping noticably.

A. High gears for +5 top speed - will keep me fast enough for another week or 2
B. Supercharger - raise condition up to 100. probably net me 3 mph top speed
C. New truck - I can currently afford an 07 truck, after buying the TTE in 2.5 hours

[MikeM]

Mike:Sorry Becky, but I bought a place and it isn't the one you were looking at.

Becky: Well where is this place?

Mike:It's parked out front...

Roll up to her house with it

Becky: Oh nice moving truck
Mike: hehehe

[MikeM]

I think I might be due for a new truck soon. Max condition is now below 95% and its dropping noticably.

A. High gears for +5 top speed - will keep me fast enough for another week or 2
B. Supercharger - raise condition up to 100. probably net me 3 mph top speed
C. New truck - I can currently afford an 07 truck, after buying the TTE in 2.5 hours

Im thinking supercharger. Besides top speed issues, my condition is deteriorated to the point where i cant haul 51k when im 5% off
and then an 08 truck in a week or 2. maybe even on sunday night

[scott3824]

wow that was rough .... i hate people that groan while shitting in public

[beckybBITCHES]

so most of you boys know i have a retarded ex husband who is a pos dad.....i've been trying to raise my child support for over a year now, they (the sheriff) keep trying to serve him papers that they're going to court to do so.....so yesterday they were suppose to go to court...nope, got cancelled because they still can't serve him....so i go pyscho on some lady today about it....and i decide to take matters in my own hands and i call his local sheriff and they agree they'll go with me next time i pick up my kids to hand him the papers right then and there....YES!!!!!

[beckybBITCHES]

i have to go to work now

[Niner]

wow that was rough .... i hate people that groan while shitting in public
Unacceptable. You get 2 deep exhales no closer than 2 minutes apart in a public shitter in my book. Unless you KNOW that no one else is there.

so most of you boys know i have a retarded ex husband who is a pos dad.....i've been trying to raise my child support for over a year now, they (the sheriff) keep trying to serve him papers that they're going to court to do so.....so yesterday they were suppose to go to court...nope, got cancelled because they still can't serve him....so i go pyscho on some lady today about it....and i decide to take matters in my own hands and i call his local sheriff and they agree they'll go with me next time i pick up my kids to hand him the papers right then and there....YES!!!!!
Hopefully he doesn't read this thread.:ese:

[MikeM]

Unacceptable. You get 2 deep exhales no closer than 2 minutes apart in a public shitter in my book. Unless you KNOW that no one else is there.


Not even. No groaning in the bathroom. Sweat it out like a man

[MikeM]

You have completed your route to Atlanta on time. You collected $226.78 of which Utopia Inc. collected $18.14 from that total to leave you with a total collection of $208.64. Your driver rating is now 25.06. You may start a new route at this time or view your driver profile for more details.

[MikeM]

Legal load limit: 51,000 lbs

[Niner]

You have completed your route to Atlanta on time. You collected $226.78 of which Utopia Inc. collected $18.14 from that total to leave you with a total collection of $208.64. Your driver rating is now 25.06. You may start a new route at this time or view your driver profile for more details.

We have a winner!

All of these short trips will boost up my DR pretty quickly.

[MikeM]

I still have $16,000, and about $55k worth of truck

still need to do much considering before upgrading my truck

[Niner]

My supervisors must really love to watch me chase my own tail. I just got thrown into a program on the day data is to be released to the tool shop. Which wouldn't be that bad if the data was complete right now.

[Niner]

I still have $16,000, and about $55k worth of truck

still need to do much considering before upgrading my truck

My truck is pretty stout for the 75K it cost.

[MikeM]

My truck is pretty stout for the 75K it cost.

if i can get teh money up by sunday night i'll probably get that one. I was gonna go for the 08 pete but the load limit isnt quite enough. Yours seems like a good deal more truck for only 5000 more

[Niner]

if i can get teh money up by sunday night i'll probably get that one. I was gonna go for the 08 pete but the load limit isnt quite enough. Yours seems like a good deal more truck for only 5000 more

Don't forget about all the loot you make selling accessories. I had more than enough money to buy the truck and all the accessories right off the bat.

[MikeM]

hauling random cargo to any company terminal pays .80ish now

[MikeM]

Don't forget about all the loot you make selling accessories. I had more than enough money to buy the truck and all the accessories right off the bat.

yeah i already counted that. What i didnt count, is that I can take out almost 8 grand in loans now. Credit limit is based on your driver rating ive found.

[MikeM]

yeah i already counted that. What i didnt count, is that I can take out almost 8 grand in loans now. Credit limit is based on your driver rating ive found.

which should easily make up the difference between the two 08 trucks

[MikeM]

Going back to Jax to get back on the glass loop

[ScottFuries]

im on the scoot time plan on getting this back together.

[ScottFuries]

blingie:ese::ese:

[Niner]

Going back to Jax to get back on the glass loop

Go to el Paso and get on the clothes loop.

[Niner]

blingie:ese::ese:

racing 905 brackets.

[MikeM]

Go to el Paso and get on the clothes loop.

is it better?

[MikeM]

im on the scoot time plan on getting this back together.

dont let it get so pretty that you dont ride it. like mine

[Niner]

is it better?

El Paseo to Phoenex. Pays like $1.80 to haul clothes to AZ from El Paseo, and $0.70 to backhaul fruit.

[ScottFuries]

dont let it get so pretty that you dont ride it. like mine

never.
i havent had a pretty bike in awhile, and being that i put no money into the prettiness i wont care.
the powdercoat guy is cool as hell, wants our shit looking good, if anything gets fucked up he will fix it asap.

[ScottFuries]

well i actually bought 15 bucks worth of plastic epoxy

[MikeM]

by the time i get out to elpaso, i'll only get one run at that bonus. cargos change tomorrow night. if i go to jax, i can get probably 4 runs at it

[MikeM]

well i actually bought 15 bucks worth of plastic epoxy

money you spend on stuff for hookers doesnt count

[ScottFuries]

think i may get my frame done now, and looking into building a powder setup in my work garage.

[MikeM]

paper to houston then gasoline back to atlanta looks good

[MikeM]

time for a dial in meeting

[Niner]

think i may get my frame done now, and looking into building a powder setup in my work garage.

I'm thinking about doing the same.

[MikeM]

time for a dial in meeting

done already. that was easy

[MikeM]

I'm thinking about doing the same.

powder coating setup or doing the frame?

[Niner]

powder coating setup or doing the frame?

Powdercoating setup.

[scott3824]

Unacceptable. You get 2 deep exhales no closer than 2 minutes apart in a public shitter in my book. Unless you KNOW that no one else is there.


Agreed. Or unless you are friends with that person. Like if I was in the shitter and you came in I would groan on purpose and laugh about it.

[scott3824]

Not even. No groaning in the bathroom. Sweat it out like a man

I usually go with the "o god o god"

[scott3824]

im on the scoot time plan on getting this back together.

My shit isnt even apart to get it back together cause i have no money to finish it. :whoopass


But that shit looks pimp buddy :thumbsup

[scott3824]

You have completed your route to Monterrey on time. You collected $608.16 of which Utopia Inc. collected $36.49 from that total to leave you with a total collection of $571.67. Your driver rating is now 4.50

[Niner]

Scoot:
http://www.supermotojunkie.com/showthread.php?t=53978

[scott3824]

Scoot:
http://www.supermotojunkie.com/showthread.php?t=53978

You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:

1. You are not logged in. Fill in the form at the bottom of this page and try again.
2. You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
3. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[Niner]

You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:

1. You are not logged in. Fill in the form at the bottom of this page and try again.
2. You may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
3. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

2005 Black DRZ 400 SM.

3x3, DJ Kit (stage 2), Steel Braided Front lines, Tires have about 350 miles on them (Michelin Pilot Powers). Acerbis hand guards, Renthal Fat bars. Home made axle sliders. Billet tip on Exhaust... keeps the bike quiet but not sounding like a sewing machine.

Bike is in Farmington Michigan.

Bike is in great shape. Greatly maintained. Has been down in the dirt only when I was tooling around on it. So due to this, it has a couple of battle scars. Nothing big, most people don't notice. They are all plastic scars, so, if you REALLY want, you can buy new plastics for it as they are not pricey.

Oil changed every 1000-1200 miles. About 4k miles. I have the title in hand and am looking to get $3600.

The pics were taken before I changed the rear tailight to an Edge this off season...

Reason for selling, I am looking to buy a house and need to free up some cash... I know, it sucks, but I'll go bikeless for a year or two, then get another one.



PM me for more pics or to see it.

[Zuki750]

2005 Black DRZ 400 SM.

3x3, DJ Kit (stage 2), Steel Braided Front lines, Tires have about 350 miles on them (Michelin Pilot Powers). Acerbis hand guards, Renthal Fat bars. Home made axle sliders. Billet tip on Exhaust... keeps the bike quiet but not sounding like a sewing machine.

Bike is in Farmington Michigan.

Bike is in great shape. Greatly maintained. Has been down in the dirt only when I was tooling around on it. So due to this, it has a couple of battle scars. Nothing big, most people don't notice. They are all plastic scars, so, if you REALLY want, you can buy new plastics for it as they are not pricey.

Oil changed every 1000-1200 miles. About 4k miles. I have the title in hand and am looking to get $3600.

The pics were taken before I changed the rear tailight to an Edge this off season...

Reason for selling, I am looking to buy a house and need to free up some cash... I know, it sucks, but I'll go bikeless for a year or two, then get another one.



PM me for more pics or to see it.
He'll have to liquidate the 954 at less than wholesale pricing to buy that. Good idea.

[scott3824]

Why would I buy another bike when I have 2 in the garage and need to come up with 15 grand?

[MikeM]

Why would I buy another bike when I have 2 in the garage and need to come up with 15 grand?

I ask myself that same question every time i buy a bike i dont need

[MikeM]

http://www.tfhrc.gov/pubrds/05sep/images/fork6.jpg

[Niner]

http://www.tfhrc.gov/pubrds/05sep/images/fork6.jpg

Crack the whip.:yes:

[MikeM]

http://www.tfhrc.gov/pubrds/05sep/images/fork3.gif

[MikeM]

Just got into my first ordeal where I had to back up with the triples. What a mess, traffic was stopped for like 10 minutes. I need to go find a huge parking lot and practice this.