Just picked up some titanium

[MikeM]

Now I gotta figure out how to attach it to a round bar

[f4stunna]

look what i just scored from work

[EZEC]

sell it to some dumbass for ski plates...

[fat_sac]

Where can I get a 3x10" piece of ti?

[MikeM]

Where can I get a 3x10" piece of ti?
from Niner

[scott3824]

Where can I get a 3x10" piece of ti?

yeah niner ... already drilled and tapped too

[MikeM]

yeah niner ... already drilled and tapped too
im thinking of bending mine into a big U and using that as the whole bar, instead of fastening a pice to the existing U

[MERK]

im thinking of bending mine into a big U and using that as the whole bar, instead of fastening a pice to the existing Uhow you plan on doin that?

[MikeM]

how you plan on doin that?
My first theory - heat it up with a torch and wrap it half way around a 5 or 6 inch cylindrical object

[scott3824]

im thinking of bending mine into a big U and using that as the whole bar, instead of fastening a pice to the existing U

ti isn't very pliable right, even when heated?

[Z-UNIT]

mike if u have a round bar scrape it down sum so there a lil 3-4 inch flat peice, then drill to holes in it....take a peice of Ti bandsaw it to be the shape of the scraped part of ur bar(oval-ish) then drill 2 coresponding holes in the TI, tap it and bolt it on....same idea as the scrape plates on the flat 905 bars

[MikeM]

mike if u have a round bar scrape it down sum so there a lil 3-4 inch flat peice, then drill to holes in it....take a peice of Ti bandsaw it to be the shape of the scraped part of ur bar(oval-ish) then drill 2 coresponding holes in the TI, tap it and bolt it on....same idea as the scrape plates on the flat 905 bars
but then instead of having a nice round bar, it would be like having a flat bar thats only 3 inches wide.

i guess that can be my fallback plan

[Niner]

yeah niner ... already drilled and tapped too
My stuff is 11"x2"x3/4" It is cut, but not drilled or tapped......yet. Should have bolt on skid plates for FI bars in a week or 2.

[MikeM]

My stuff is 11"x2"x3/4" It is cut, but not drilled or tapped......yet. Should have bolt on skid plates for FI bars in a week or 2.
Hurry the f up before someone else wraps up the market

[Niner]

Hurry the f up before someone else wraps up the market
My boy's going to get them drilled this weekend.

[scott3824]

My boy's going to get them drilled this weekend.

I'm drilling your mom this weekend

[MikeM]

I'm drilling your mom this weekend
Dont kiss her or eat her out. (unless its befoer friday night, in which case i shouldnt kiss her)

[CantGetRight]

My first theory - heat it up with a torch and wrap it half way around a 5 or 6 inch cylindrical object
yup, heat is the key, its a pain to work with.

the pavement wears it through fairly quick, its not indestructible

[MikeM]

the pavement wears it through fairly quick, its not indestructible
really? ok maybe i should go back to the idea of making a small flat plate

[trick]

sell it to some dumbass for ski plates...
i will sell u the pice that ganna come out of my leg !!!!!!!!!!!!!!
i will have it in hand in 4 months
any one want it
starting bid is 50 bucks