my nipples are really

[beckybBITCHES]

yeah right...now every since I could remember I been poppin my collar :pimp:

[LEASNIT]

Gangsta's.....

[TongWoo]

These guys tried to get into my pants at stuntwars.



http://www.stuntusa.com/forums/attachment.php?attachmentid=32581

[Niner]

These guys tried to get into my pants at stuntwars.



http://www.stuntusa.com/forums/attachment.php?attachmentid=32581
Notice I am NOT in the picture. LOL.


Is that the verison Wireless guy on the right and his network?

[TongWoo]

Notice I am NOT in the picture. LOL.


Is that the verison Wireless guy on the right and his network?
Hahahahahaaaa!!!

[LEASNIT]

Same night ....... yeah im drunk...

http://www.detroitshated.com/uploads/Partypics101.jpg

[scott3824]

Notice I am NOT in the picture. LOL.


Is that the verison Wireless guy on the right and his network?


Um fuck you I don't look like him :asshole:

[scott3824]

I think becky's original point here was to make fun of timmy and his popped collar

[Niner]

Um fuck you I don't look like him :asshole:
I pointed it out to Cramer last night when the comercial came on TV and he almost fell out of his chair.

[beckybBITCHES]

Um fuck you I don't look like him :asshole:
aww you kinda do....do you wear glasses at all?

[scott3824]

I pointed it out to Cramer last night when the comercial came on TV and he almost fell out of his chair.

Dammit :bomb: :rotfl: :banhim:

[MikeM]

I think becky's original point here was to make fun of timmy and his popped collar
lmao
somebody find the commercial on the internet

[scott3824]

aww you kinda do....do you wear glasses at all?

ChairBeat

yes at work and when i dont feel like putting contacts in



BACK TO T&A AND HIS POPPED COLLAR

[beckybBITCHES]

ChairBeat

yes at work and when i dont feel like putting contacts in



BACK TO T&A AND HIS POPPED COLLAR
post a picture wearing them

[scott3824]

post a picture wearing them

sorry none on my laptop .. well only a side view one

[CustomFighterer]

duh HOLLISTER IS SO COOL YOU GUYS! OF COURSE HIS COLLAR IS POPPED!
:bowdown

[Bray]

Pimps :musicpimp

[Miss Chievous]

holler

[LEASNIT]

my head hurts...

[scott3824]

my head hurts...

CAN YOU HEAR ME KNOW BITCH

[LEASNIT]

CAN YOU HEAR ME KNOW BITCH

Na... ur network is a lil fuzzy ... u callin from a nextel? LOL

[LEASNIT]

Movin here!

[LEASNIT]

Ever since I can remember I been poppin my collar...

[beckybBITCHES]

Ever since I can remember I been poppin my collar...
ever since i can remember i've been workin these hoes

[LEASNIT]

I have egg stuck in my tooth...

[LEASNIT]

I have egg stuck in my tooth...

Nevermind ... got it....

[beckybBITCHES]

i need to go pluck my eyebrows for my hot date

[CrTcHRkTRcR]

god ta is sooo metro..

[LEASNIT]

almost 150 today ... still weak, I been here since 9 .... gettin some laundry done tho, thats a plus...

[beckybBITCHES]

i need to go do laundry to, i'll do that in like an hour, no one will be there

[Niner]

http://www.popvssoda.com/

[LEASNIT]

Laundry sucks ... I gotta make some phones calls, see who's rollin out to Milan tonite...

[Niner]

Laundry sucks ... I gotta make some phones calls, see who's rollin out to Milan tonite...
Too bad that shiot didn't start at 9 or 10.

[beckybBITCHES]

http://www.popvssoda.com/
i said pop

[LEASNIT]

Too bad that shiot didn't start at 9 or 10.

w3rd.... keller said hes rollin out about 5-6 ... Scoot the same ... bout to call DStyle see if that nig still wants to drive..

[LEASNIT]

its fucking POP!!!!!!

[LEASNIT]

it supposed to rain tonite?

[LEASNIT]

4 in a row?

[CrTcHRkTRcR]

uh oh t&a is watchin.. you gettin all sensitive?



k i gotta do some work my niggas

[T&A]

Thansk for the love you bastids...one shirt I own has a popped collar and I wore it on the wrong night...dammit :69:

[LEASNIT]

uh oh t&a is watchin.. you gettin all sensitive?



k i gotta do some work my niggas

PTFO....

[T&A]

uh oh t&a is watchin.. you gettin all sensitive?



k i gotta do some work my niggas

nope not sensitive...

[LEASNIT]

aight time to be productive .. I think...

[Niner]

aight time to be productive .. I think...
Go dremel your firewall.

[beckybBITCHES]

its fucking POP!!!!!!
that's what i said

[LEASNIT]

I AM ... GASOLINE ...........

[LEASNIT]

Go dremel your firewall.

Yeah that sucks.. im voting against it ... I gotta call Ted ...

[scott3824]

it supposed to rain tonite?

no

[scott3824]

w3rd.... keller said hes rollin out about 5-6 ... Scoot the same ... bout to call DStyle see if that nig still wants to drive..

Do it

[Niner]

Hey Mike!

[scott3824]

No more 5 for 5 at arbys i was pissed .... i got mozz sticks and a beef and cheddar and that cost me $5 alone .... then i bought a POP out of the vending machine here

[LEASNIT]

Do it

I am!

[scott3824]

I am!

tell him hes my hero

[LEASNIT]

tell him hes my hero

Lol.. mmmm K...

[beckybBITCHES]

No more 5 for 5 at arbys i was pissed .... i got mozz sticks and a beef and cheddar and that cost me $5 alone .... then i bought a POP out of the vending machine here
LOL

i do say soda too...but i refuse to say soda machine, sometimes i say i'm going to go get a soda out of the pop machine, lol

[CrTcHRkTRcR]

k.. i typed a letter.. good enough for now.. but once the boss lady gets in.. it's gonna suck

[LEASNIT]

Sweet.. only an extra 5.50 to 2day ship it ...

[Niner]

No more 5 for 5 at arbys i was pissed .... i got mozz sticks and a beef and cheddar and that cost me $5 alone .... then i bought a POP out of the vending machine here
What? I saw signs for it just this week! And a commercial on TV. :wtf:

[Niner]

Sweet.. only an extra 5.50 to 2day ship it ...
What? Depending on size UPS ground normally takes the same amount of time.

[Niner]

Adam, who makes the best transmission crossmember?

[LEASNIT]

Adam, who makes the best transmission crossmember?

Me .... and the cheapest... :gpimp

[scott3824]

What? I saw signs for it just this week! And a commercial on TV. :wtf:

probably here in monroe because they suck

[LEASNIT]

probably here in monroe because they suck

He didnt answer.....

[LEASNIT]

Everytime I hear this song is makes me wanna violently cave someones skull in ....

Mudvayne - DIG ...

[MikeM]

mc chicken

[MikeM]

Everytime I hear this song is makes me wanna violently cave someones skull in ....

Mudvayne - DIG ...
go beat off

[CrTcHRkTRcR]

mc chicken
spicey mc chicken.. that's where it's at...
k so what day did u ship that part?
also, i have some important info i need to send you

[scott3824]

go beat off

i beat off right after i got laid last night.

[Niner]

go beat off
Go back a page or 2. I posted a pic for you.

[Niner]

Me .... and the cheapest... :gpimp
Make me one.

[beckybBITCHES]

i beat off right after i got laid last night.
why

[Niner]

why
He told me because he can't get off with women. :gay:

[scott3824]

why

why not ... im a horn ball ... she wanted to shower and sleep ... i wanted to bust another nut

[beckybBITCHES]

He told me because he can't get off with women. :gay:
:rotfl: :rotfl: :rotfl: :rotfl:

[scott3824]

He told me because he can't get off with women. :gay:

your attempts at burns are pathetic

[CrTcHRkTRcR]

He told me because he can't get off with women. :gay:
ahahhahaha :owned:

[LEASNIT]

Make me one.

Wtf do I look like ... Chip Foose? .. Geeeezus .. go pick up 4 3/8 x 1.5" socket head bolts with lock washers and nuts....

[Niner]

your attempts at burns are pathetic
It was a free post. :btroll:

[beckybBITCHES]

It was a free post. :btroll:
it was a good one

[Niner]

Wtf do I look like ... Chip Foose? .. Geeeezus .. go pick up 4 3/8 x 1.5" socket head bolts with lock washers and nuts....
For why?

[CrTcHRkTRcR]

mike sucks at posting today

[LEASNIT]

For why?

for ur tranny xmember .... you dont need a new one, u just need to remove the lower plates from the frame rails....

[LEASNIT]

I gotta dope ass one I made outta 2x3 .25 wall tubing ... but thats when I had shitloads of extra steel layin around....

[Niner]

for ur tranny xmember .... you dont need a new one, u just need to remove the lower plates from the frame rails....
And the bolts are for?

[scott3824]

mike sucks at posting today

you suck at life

[Niner]

I gotta dope ass one I made outta 2x3 .25 wall tubing ... but thats when I had shitloads of extra steel layin around....
Gimmie!

[LEASNIT]

And the bolts are for?

Bolting the thing back in after u remove the stock bolts and plates... drill out the holes and counter sink the bolts so it bolts in to just the top of the frame.. I'll show ya how.. its easy... i've done about 10 of em...

[Niner]

Wtf do I look like ... Chip Foose? .. Geeeezus .. go pick up 4 3/8 x 1.5" socket head bolts with lock washers and nuts....
Thread pitch? And by Socket head do you mean hex head?

[CrTcHRkTRcR]

you suck at life
hey lil guy don't be all bitter today... i'm sure if you picture mikem's head on your woman you could get off.. it'll be ok :rotfl:

[LEASNIT]

Gimmie!

Its kinda... WELDED to my truck... LOL

[Niner]

Bolting the thing back in after u remove the stock bolts and plates... drill out the holes and counter sink the bolts so it bolts in to just the top of the frame.. I'll show ya how.. its easy... i've done about 10 of em...
Gets rid of the triangular piece?

[Niner]

Its kinda... WELDED to my truck... LOL
Make me a new one. A bolt in.

[LEASNIT]

Thread pitch? And by Socket head do you mean hex head?

Pitch dont matter, just match it to the nut you get.. coarse.. fine... whatever ur feelin I guess....

Socket head... Cap screw... damn allen wrench fits in the top ... LOL

[MikeM]

Make me a new one. A bolt in.
make your own

[CrTcHRkTRcR]

doyou have to hold niners hand for everything?

[LEASNIT]

Gets rid of the triangular piece?

Yeah .. thats all u need to do ...

[MikeM]

doyou have to hold niners hand for everything?
sounds like it

[Niner]

Pitch dont matter, just match it to the nut you get.. coarse.. fine... whatever ur feelin I guess....

Socket head... Cap screw... damn allen wrench fits in the top ... LOL
:thumbsup

[LEASNIT]

Make me a new one. A bolt in.

Would cost u 100 bucks in parts... and a day of labor ... Waste of time and money .. LOL... but I didnt know back then ... the sides are burned to the frame and the center drops out if I need to work on the tranny ... dont think I ever took pics but it was nice...

[CrTcHRkTRcR]

sounds like it
are you going to reply to what i asked you or what

[MikeM]

are you going to reply to what i asked you or what
what was the question?

[LEASNIT]

doyou have to hold niners hand for everything?

Na ... but im a good " Go To " guy ... :yes:

[LEASNIT]

what was the question?

A.D.D.?

[Niner]

doyou have to hold niners hand for everything?
I'm a rookie to fabrication work.

[CrTcHRkTRcR]

what was the question?
what day did u send that shit?
and also, i recieved important documents you might want to add to a file.. email addy?

[LEASNIT]

Closest bewbie grabbin pic I could find Mike.........

[CrTcHRkTRcR]

I'm a rookie to fabrication work.
my old method was pretend i knew what i was doing.. nigger rig something horrible.. use your friends tools.. and they will get so pissed off about it, they say "no, that's not how u do it, le tme do it.." wa la, project done

[Niner]

Yeah .. thats all u need to do ...
Center of the x-member won't drag? I'm all about cleaning up the bottom of the truck. I figure it will drag less over speed bumps and if anything bottoms out it will be the frame.

[LEASNIT]

my old method was pretend i knew what i was doing.. nigger rig something horrible.. use your friends tools.. and they will get so pissed off about it, they say "no, that's not how u do it, le tme do it.." wa la, project done

haha ... I used to rig alot of things, not gonna lie... but thats how u learn... well, that and watching ppl that have a couple more clues to what there doing then you...

[CrTcHRkTRcR]

Center of the x-member won't drag? I'm all about cleaning up the bottom of the truck. I figure it will drag less over speed bumps and if anything bottoms out it will be the frame.
she gonna be bagged? :drunkchee

[LEASNIT]

Center of the x-member won't drag? I'm all about cleaning up the bottom of the truck. I figure it will drag less over speed bumps and if anything bottoms out it will be the frame.

No, center of the xmemeber is like a cunt hair higher then the frame....

[MikeM]

what day did u send that shit?
and also, i recieved important documents you might want to add to a file.. email addy?
ill run out to my truck and check the receipt from the post office. brb

mikem631@gmail.com

[CrTcHRkTRcR]

haha ... I used to rig alot of things, not gonna lie... but thats how u learn... well, that and watching ppl that have a couple more clues to what there doing then you...
yeah i figured shit out now.. i'm pretty decent with a welder and grinder n shit.. i make things work... especially being unemployed for a few months.. you get bored and make things

[LEASNIT]

she gonna be bagged? :drunkchee

If he puts his purse down and pulls out his wallet... I told him i'd damn near bag the entire thing for beer n food ...

[CrTcHRkTRcR]

ill run out to my truck and check the receipt from the post office. brb

mikem631@gmail.com
sent

[scott3824]

doyou have to hold niners hand for everything?


niner sucks as an engineer

[CrTcHRkTRcR]

If he puts his purse down and pulls out his wallet... I told him i'd damn near bag the entire thing for beer n food ...
pffft... come bag my shit.. i want to.. but i think it'd be like your truck and never be finished...i'm still wondering when i'm gonna get bored n drunk enough to take apart my doors and attempt to shave them...

[CrTcHRkTRcR]

niner sucks as an engineer
why are you so cranky today? is it cuz mike hasn't been around much?

[scott3824]

why are you so cranky today? is it cuz mike hasn't been around much?

im not cranky at all ... well maybe a little cause i want a vitamin cause my back is killin me

[LEASNIT]

pffft... come bag my shit.. i want to.. but i think it'd be like your truck and never be finished...i'm still wondering when i'm gonna get bored n drunk enough to take apart my doors and attempt to shave them...

Keep the heat low ... jump around with ur tacks.. and take time for it to cool down, if u have a compressor and a blow gun, lay about 5-6 tacks n hit it with that to cool it down...

[CrTcHRkTRcR]

so just tac it on.. so it doesn't warp.. and then grind.. then bondo fun

[Niner]

Keep the heat low ... jump around with ur tacks.. and take time for it to cool down, if u have a compressor and a blow gun, lay about 5-6 tacks n hit it with that to cool it down...
I can weld drunk.

[Niner]

If he puts his purse down and pulls out his wallet... I told him i'd damn near bag the entire thing for beer n food ...
I'm $8,000 away from buying that shit.

[CrTcHRkTRcR]

a bunch of the glasses in my kitchen have pitted marks from the welds sparking onto them.. it's pretty gangster

[Niner]

so just tac it on.. so it doesn't warp.. and then grind.. then bondo fun
Yup. Not bono. Tiger hair. then sand, then bondo.

[LEASNIT]

so just tac it on.. so it doesn't warp.. and then grind.. then bondo fun

Yeah .. tack it, but fully weld it still.. just dont lay beads.... then take a 80 grit flap disc to it.... not to forcefully.. that'll heat it up quick too .....

then lay down some duraglass...sand ... then use a more fine filler......

[LEASNIT]

a bunch of the glasses in my kitchen have pitted marks from the welds sparking onto them.. it's pretty gangster

welding in the kitchen? .. haha ... nice nice...

[Niner]

a bunch of the glasses in my kitchen have pitted marks from the welds sparking onto them.. it's pretty gangster
Sweet.

[LEASNIT]

I can weld drunk.

haha.....

[CrTcHRkTRcR]

Important medical update! Be sure to read this one.

In Pharmacology, all drugs have two names, a trade name and generic name. For example, the trade name of Tylenol also has a generic name of Acetaminophen. Aleve is also called Naproxen. Amoxil is also call Amoxicillin and Advil is also called Ibuprofen.

The FDA has been looking for a generic name for Viagra. After careful consideration by a team of government experts, it recently announced that it has settled on the generic name of Mycoxafloppin. Also considered were Mycoxafailin, Mydixadrupin, Mydixarizin, Dixafix, and of course, Ibepokin.

Pfizer Corp. announced today that Viagra will soon be available in liquid form, and will be marketed by Pepsi Cola as a power beverage suitable for use as a mixer. It will now be possible for a man to literally pour himself a stiff one. Obviously we can no longer call this a soft drink, and it gives new meaning to the names of "cocktails", "highballs" and just a good old-fashioned "stiff drink". Pepsi will market the new concoction by the name of: MOUNT & DO.

Thought for the day: There is more money being spent on breast implants and Viagra today than on Alzheimer's research. This means that by 2040, there should be a large elderly population with perky boobs and huge erections and absolutely no recollection of what to do with them.

[Niner]

pffft... come bag my shit.. i want to.. but i think it'd be like your truck and never be finished...i'm still wondering when i'm gonna get bored n drunk enough to take apart my doors and attempt to shave them...
Get the AVS kit. Shit is easy as hell to install.

[CrTcHRkTRcR]

welding in the kitchen? .. haha ... nice nice...
nah.. from drinkin in the garage dummy

i didn't realize mike parked 1.8miles away :jaman

[LEASNIT]

lmao@mycoxafloppin...

[CrTcHRkTRcR]

Get the AVS kit. Shit is easy as hell to install.
linky

[LEASNIT]

nah.. from drinkin in the garage dummy

i didn't realize mike parked 1.8miles away :jaman

haha ... I would weld in my kitchen, hell I sand car parts in my bedroom....

[Niner]

Yeah .. tack it, but fully weld it still.. just dont lay beads.... then take a 80 grit flap disc to it.... not to forcefully.. that'll heat it up quick too .....

then lay down some duraglass...sand ... then use a more fine filler......
I can do some gangster body work.

[Niner]

linky
http://www.airbagparts.com/

[CrTcHRkTRcR]

haha ... I would weld in my kitchen, hell I sand car parts in my bedroom....
rosa wouldn't like to clean up sanding dust

[LEASNIT]

I can do some gangster body work.

It's cause your fabricator/weldor rocks.... :woot

[LEASNIT]

rosa wouldn't like to clean up sanding dust

haha ....

hrmmmmmm... damn im hungry again, think imma go make a sammich...

[LEASNIT]

yup.. deff sammich time... shit, im gonna break 200 posts here soon....

[CrTcHRkTRcR]

haha ....

hrmmmmmm... damn im hungry again, think imma go make a sammich...
maybe egg beaters n a bottle of olive oil?

damn,, lambo door kits 125 shipped for 4.. hmm

[Miss Chievous]

new thread i see

[LEASNIT]

maybe egg beaters n a bottle of olive oil?

damn,, lambo door kits 125 shipped for 4.. hmm

dont even think about it......

You want lambo doors.. buy a lambo ...

[CrTcHRkTRcR]

cancel that.. suicide door kits... who the fuck is sizzle? and why don't they post?

[LEASNIT]

cancel that.. suicide door kits... who the fuck is sizzle? and why don't they post?

best suicide door kit on the market....

http://www.suicidedoors.com/SuicideDoorCompleteHingeKit.php

[MikeM]

crotch - according to the receipt I just sent it 2 day priority mail... 8 minutes ago

[scott3824]

crotch - according to the receipt I just sent it 2 day priority mail... 8 minutes ago

:rotfl:
:rotfl:

[CrTcHRkTRcR]

crotch - according to the receipt I just sent it 2 day priority mail... 8 minutes ago
haha.. so when you said run to your truck to get the receipt.. you meant take your truck to the post office to send it

[LEASNIT]

haha.. so when you said run to your truck to get the receipt.. you meant take your truck to the post office to send it

lmao...

[CrTcHRkTRcR]

lease.. do they make sheetmetal plates that are pre molded to tac on?

[LEASNIT]

lease.. do they make sheetmetal plates that are pre molded to tac on?
http://www.suicidedoors.com/SheetmetalFillerPlates.php ... still needs to be cleaned up tho... Niners 3rd brake light filler wasnt even close...

[MikeM]

haha.. so when you said run to your truck to get the receipt.. you meant take your truck to the post office to send it
yeah
i tried to get it sent from work at the beginning of the week cuz im lazy, but that didnt work

[CrTcHRkTRcR]

wow... this might actually happen...hmm

[MikeM]

maybe egg beaters n a bottle of olive oil?

damn,, lambo door kits 125 shipped for 4.. hmm
thats it?

[CrTcHRkTRcR]

yeah
i tried to get it sent from work at the beginning of the week cuz im lazy, but that didnt work
so you lied to me... thanks! :flipoff:
\
oh well.. i will live.. did u get that email?

[CrTcHRkTRcR]

thats it?
nah.. it's for suicide doors.. so they just open opposite.... but prewired popper kits are 140.. and the door patchs are like 9 bucks.. so have her shaved for 150 bucks n a few hours of labor

[MikeM]

so you lied to me... thanks! :flipoff:
\
oh well.. i will live.. did u get that email?
i said i sent it out, which was technically true

[MikeM]

nah.. it's for suicide doors.. so they just open opposite.... but prewired popper kits are 140.. and the door patchs are like 9 bucks.. so have her shaved for 150 bucks n a few hours of labor
how do you get in when your battery dies?

[CrTcHRkTRcR]

i said i sent it out, which was technically true
you sent it to your office.. not to me.. which would be an indirect answer to my question

[scott3824]

i would get lambo over suicide ... they look cooler

[LEASNIT]

nah.. it's for suicide doors.. so they just open opposite.... but prewired popper kits are 140.. and the door patchs are like 9 bucks.. so have her shaved for 150 bucks n a few hours of labor

Pretty much... just make sure u dont create any high spots with the metal, u can always use filler for the low spots....

[MikeM]

i gotta catch a 7 pm ferry thats 2 hours away, theres no way im hittin 10k today

[LEASNIT]

i would get lambo over suicide ... they look cooler

Yeah ... on a lamborgheni ... other then that.. shits GHETTO....

[MikeM]

you sent it to your office.. not to me.. which would be an indirect answer to my question
yeah im slick with the indirect answers

[scott3824]

how do you get in when your battery dies?

piece of ceramic off your pplug into the window

[scott3824]

Yeah ... on a lamborgheni ... other then that.. shits GHETTO....

i would think you'd be into them then :flipoff: lmao

[MikeM]

piece of ceramic off your pplug into the window
thats what i was thinking

[CrTcHRkTRcR]

how do you get in when your battery dies?
they have emergency wires.. u just hide them.. and wa la... we put them on my buddies car.. but instead of a switch... we put a magnet on his keychain, and when u passed it near his side mirror, door went POP... was pretty gangster

[LEASNIT]

how do you get in when your battery dies?

an emergency pull cable .... slim jim it... run a 9v back up battery in the truck...

[MikeM]

they have emergency wires.. u just hide them.. and wa la... we put them on my buddies car.. but instead of a switch... we put a magnet on his keychain, and when u passed it near his side mirror, door went POP... was pretty gangster
oh a magnetic switch, thats sick. but that still wouldnt work when the battery dies

[LEASNIT]

piece of ceramic off your pplug into the window

thats my trick ... also how those nig's jacked my radio on my driveway... LOL

[scott3824]

they have emergency wires.. u just hide them.. and wa la... we put them on my buddies car.. but instead of a switch... we put a magnet on his keychain, and when u passed it near his side mirror, door went POP... was pretty gangster

so anyone could walk by and get in with a magnet

[scott3824]

thats my trick ... also how those nig's jacked my radio on my driveway... LOL

:check:

[CrTcHRkTRcR]

i gotta catch scoot,hes 2 hours away, theres no way im hittin 10k today
:flipoff:

[LEASNIT]

so anyone could walk buy and get in with a magnet

You keep that shit a secret.. fool ... kinda like how my hood release is in my wheel well ... not that gettin under the hood is gonna get u nething...

[MikeM]

:flipoff:
almost amusing

[CrTcHRkTRcR]

so anyone could walk by and get in with a magnet
it was his standard poppers.. not his emergency one..
um yeah, cuz ppl always break into cars by running magnets near the cars mirrors :bs:

[scott3824]

You keep that shit a secret.. fool ... kinda like how my hood release is in my wheel well ... not that gettin under the hood is gonna get u nething...

ok so a nerd like me walks buy with a big ass magnet in his book bag and POP ... new system for me

[MikeM]

You keep that shit a secret.. fool ... kinda like how my hood release is in my wheel well ... not that gettin under the hood is gonna get u nething...
wheres the alarm siren mounted?

[LEASNIT]

ok so a nerd like me walks buy with a big ass magnet in his book bag and POP ... new system for me

lmao .. why are u carrying a giant magnent?

[scott3824]

almost amusing

simple minds are easily ammused

[CrTcHRkTRcR]

ok so a nerd like me walks buy with a big ass magnet in his book bag and POP ... new system for me
only you would have a giant magnet in your backpack...

[MikeM]

lmao .. why are u carrying a giant magnent?
to erase your vhs tapes

[LEASNIT]

wheres the alarm siren mounted?

Under the truck ... batterys in the truck ... all the wires are in the truck ... u could steal my intake filter... LOL

[scott3824]

lmao .. why are u carrying a giant magnent?

a.) to erase hard drive data instantly

b.) building a magnet motor

c.) hit someone over the head that asks dumb questions

[Niner]

how do you get in when your battery dies?
They provide a way to open the door in the AVS kit. One more reason why it is the best.

[LEASNIT]

to erase your vhs tapes

whats a vhs? LOL

[scott3824]

only you would have a giant magnet in your backpack...

I bet mikes tried to build a magnetic motor or something

[LEASNIT]

a.) to erase hard drive data instantly

b.) building a magnet motor

c.) hit someone over the head that asks dumb questions

LOL ... u are a nerd. No futher comments...

[CrTcHRkTRcR]

a.) to erase hard drive data instantly

b.) building a magnet motor

c.) hit someone over the head that asks dumb questions
mikes here.. you can PERC up..

[MikeM]

Under the truck ... batterys in the truck ... all the wires are in the truck ... u could steal my intake filter... LOL
id be more likely to shit in your intake and put the filter back on

[MikeM]

I bet mikes tried to build a magnetic motor or something
i built a rail gun once. it sucked

[scott3824]

LOL ... u are a nerd. No futher comments...

d.) teach kickball players about the earths magnetic field

[CrTcHRkTRcR]

:boner: mike mike mike mike mike mike mike mike mike mike mike mike mike mike mike mike :cloud9: :cloud9: :cloud9:
:jerkit:

[MikeM]

a.) to erase hard drive data instantly

b.) building a magnet motor

c.) hit someone over the head that asks dumb questions
what a nerd

[LEASNIT]

id be more likely to shit in your intake and put the filter back on

Might not fit... I have a short tube... and the mass flow air sensor is damn near in the throttle body..

[Niner]

i built a rail gun once. it sucked
?

[Niner]

Might not fit... I have a short tube... and the mass flow air sensor is damn near in the throttle body..
Piss in the throttle body?

[scott3824]

id be more likely to shit in your intake and put the filter back on

ahahahahahahahahahaha

that made me lol

[LEASNIT]

Piss in the throttle body?

keep ur pee pee away from my throttle body ... i'll put one of those tornado things in there so u cut ur dick on it..

[scott3824]

?

http://www.powerlabs.org/railgun.htm

[CrTcHRkTRcR]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_7.jpg

wtf!?

[MikeM]

?
picture train tracks, with electromagnets on both sides every foot
a car on the tracks is magnetically charged
when the car gets near, the electromagnets are turned on so they repel the car, and push it along

now picture that condensed to use a 2" pvc pipe

[LEASNIT]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_7.jpg

wtf!?

LOL ... its a joke ...

[MikeM]

http://www.powerlabs.org/railgun.htm
that ones cooler than mine

[Niner]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_7.jpg

wtf!?
It's a bolt on body drop.

[LEASNIT]

picture train tracks, with electromagnets on both sides every foot
a car on the tracks is magnetically charged
when the car gets near, the electromagnets are turned on so they repel the car, and push it along

now picture that condensed to use a 2" pvc pipe

For some reason I think whole paragraph might turn Ali on...

[MikeM]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_7.jpg

wtf!?
photoshop

where the fuk is the top of the front wheels?

[Niner]

keep ur pee pee away from my throttle body ... i'll put one of those tornado things in there so u cut ur dick on it..
Those don't work. We made a energy systems lab project out of testing to see if they work.

[MikeM]

For some reason I think whole paragraph might turn Ali on...
if she was sayin it id be turned on

[scott3824]

that ones cooler than mine

No shit that dude got 40Kiloamperes out of it damn

[CrTcHRkTRcR]

photoshop

where the fuk is the top of the front wheels?
that's what i was thinkin.. there's more

[LEASNIT]

Those don't work. We made a energy systems lab project out of testing to see if they work.

Sweet, that'll save me 75 bucks.. LOL

[CrTcHRkTRcR]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_3.jpg
horrible photoshop

[LEASNIT]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_3.jpg
horrible photoshop

I've actully seen a truck or 2 almost that damn low.... there's a astro van thats llike damn near cut in half .... it drives, but it cant turn.. LOL

[Niner]

http://www.suicidedoors.com/images/products/Bolt_on_Kit_3.jpg
horrible photoshop
Read the item description.

[MikeM]

Read the item description.
theres no description, its just a pic

[Niner]

NEW FROM KRIS DYE FABRICATIONS IS THE BOLT ON BODY DROP KIT. NOW YOU CAN LAY ROCKER OR DOOR WITH THE SIMPLE INSTALLATION OF THIS HEAVY DUTY BRACKET KIT. INSTALLATION IS FAST!! MOST PEOPLE CAN DO IT IN THEIR DRIVEWAY IN LESS THAN 30 MINUTES. TOOLS REQUIRED: FLATHEAD SCREWDRIVER, RUBBER MALLET, BUTTER
KNIFE, 10MM OPEN END BOX WRENCH, CENTER PUNCH, SALAD TONGS, 12 PACK OF BEER, AND 1 PLAYBOY MAGAZINE FROM APRIL 2004. TRUST US! YOU WILL NOT BE DISAPOINTED IN THE QUALITY OF THIS KIT.

[CrTcHRkTRcR]

Read the item description.
no :shoot:

[scott3824]

No shit that dude got 40Kiloamperes out of it damn


oooo heres a sweet site ...
http://www.glubco.com/weaponry/railgun.htm

[CrTcHRkTRcR]

damnit.. i only have april 2003 :(

[scott3824]

electromagnetic propulsion is cool

[CrTcHRkTRcR]

electromagnetic propulsion is cool
:ese:

[LEASNIT]

http://www.suicidedoors.com/images/products/mid_Blazer_Body_Drop_Kit.jpg

NEW FROM KRIS DYE FABRICATIONS IS THE BOLT ON BODY DROP KIT. NOW YOU CAN LAY ROCKER OR DOOR WITH THE SIMPLE INSTALLATION OF THIS HEAVY DUTY BRACKET KIT. INSTALLATION IS FAST!! MOST PEOPLE CAN DO IT IN THEIR DRIVEWAY IN LESS THAN 30 MINUTES. TOOLS REQUIRED: FLATHEAD SCREWDRIVER, RUBBER MALLET, BUTTER
KNIFE, 10MM OPEN END BOX WRENCH, CENTER PUNCH, SALAD TONGS, 12 PACK OF BEER, AND 1 PLAYBOY MAGAZINE FROM APRIL 2004. TRUST US! YOU WILL NOT BE DISAPOINTED IN THE QUALITY OF THIS KIT.

[Niner]

electromagnetic propulsion is cool
Go buy a prius then.

[LEASNIT]

Dammit Niner... LOL

[CrTcHRkTRcR]

electromagnetic propulsion is cool
this is when scoot makes a comment about this being over my head... don't bother scoot.. i understand it completely

[Niner]

Dammit Niner... LOL
I can't help it you are slow.

[LEASNIT]

Well Mike aint goin ... dammit...

[scott3824]

this is when scoot makes a comment about this being over my head... don't bother scoot.. i understand it completely

I never said you were unintelligent fuckstick

[MikeM]

this is when scoot makes a comment about this being over my head... don't bother scoot.. i understand it completely
^^^
this nigga took high school physics 3 times

[Niner]

What kind of grinder is good quality and inexpensive?

[MikeM]

Well Mike aint goin ... dammit...
goin where?

[LEASNIT]

What kind of grinder is good quality and inexpensive?

Dewalt ... 60 bucks.. home depot ... Mines almost done.. LOL, I gotta bang it on the ground now for it to work....

[LEASNIT]

goin where?

Not you .. DetroitStyle .... to Milan tonite ...

[CrTcHRkTRcR]

simple minds are easily ammused
what was your previous statement?

[scott3824]

Not you .. DetroitStyle .... to Milan tonite ...

tell him hes getting kicked in the nuts

[Niner]

I told my boos that my counterpart wanted access to my part library and that I didn't want him in there messing up all my hard work and that I would upload anything that need to be entered. He said "This is the guy who has problems starting his computer once a week, so I don't blame you. I'm fine with NOT giving him access." :claps :dance:

[CrTcHRkTRcR]

Dewalt ... 60 bucks.. home depot ... Mines almost done.. LOL, I gotta bang it on the ground now for it to work....
i got a makita i think.. she works prime

[scott3824]

what was your previous statement?

aw did mr. sensitive forget how to take a joke

[Niner]

Dewalt ... 60 bucks.. home depot ... Mines almost done.. LOL, I gotta bang it on the ground now for it to work....
Wow, you make them sound real reliable *rolls eyes*.

[scott3824]

I told my boos that my counterpart wanted access to my part library and that I didn't want him in there messing up all my hard work and that I would upload anything that need to be entered. He said "This is the guy who has problems starting his computer once a week, so I don't blame you. I'm fine with NOT giving him access." :claps :dance:

way to kick him down a notch on the corporate ladder :claps

[Niner]

Not you .. DetroitStyle .... to Milan tonite ...
I got to call him.

[LEASNIT]

i got a makita i think.. she works prime

Yup.. nice also ... round the same price.. 80 I think ....

Metabo's are by far the baddest bitches tho....... they'll cut thru steel, concrete.. anything....

[Niner]

way to kick him down a notch on the corporate ladder :claps
I was nicer than the lady next to me. I like to practice office politics. She just told my boss straight up to fire him. She also has 16 years in and the divison's testing would be completely lost if She ever left.

[MikeM]

I told my boos that my counterpart wanted access to my part library and that I didn't want him in there messing up all my hard work and that I would upload anything that need to be entered. He said "This is the guy who has problems starting his computer once a week, so I don't blame you. I'm fine with NOT giving him access." :claps :dance:
way to be niner

[CrTcHRkTRcR]

aw did mr. sensitive forget how to take a joke
:rainyday :Noooo:

[Niner]

Yup.. nice also ... round the same price.. 80 I think ....

Metabo's are by far the baddest bitches tho....... they'll cut thru steel, concrete.. anything....
They like $150?

[LEASNIT]

Wow, you make them sound real reliable *rolls eyes*.

Ive had mine for 4 years and built proly 7-8 vehicles with it.... I abuse the fuck outta it too....