PDA

View Full Version : 600RR SI-Cage installation problem

XtremeRR
06-12-2007, 06:00 PM
the screw for the right engine mount is much smaller/thinner than the original one, and for the left side the screw is too short, and the spacer is too small as well to put it into the right side engine mount/clamp.

what about the threaded rod for the rear mount, is it right that it is thinner than the original rod, doesn´t it need a spacer as well?? maybe i do something wrong but installing the right side is not easy because the smaller/thinner screw of course doesn´t fit the thread in the motor. and the too short screw for the left side makes it imposible to tighten it.....it´s 1 inch too short.

had anybody the same problems on a 600RR???
SKILLZ 750
06-12-2007, 06:07 PM
my FI went in no issues
TRICKY
06-12-2007, 06:15 PM
my FI went in no issues

He had an FI b4 and it was the biggest pain in the ass ever to make it fit the 600RR, that´s why he got an SI cage now.
SKILLZ 750
06-12-2007, 06:18 PM
He had an FI b4 and it was the biggest pain in the ass ever to make it fit the 600RR, thatīs why he got an SI cage now.

do your knees hurt?
miltIV
06-12-2007, 08:43 PM
those stock bolts are junk any way homie. mine bent to hell (same bike and cage) after about two sessions. went to the hardware store and got some better ones(longer,thicker) and have no issues now. dont change the "threadall" bolt at the rear though, it has to be that small so you can get a nut around it inside the cage. i forgot to mention that other than the stock bolts it is the best cage on the planet! stong as hell, no rollover, and no bruised ass shins and knees like on the powers or 905.
TRICKY
06-13-2007, 11:39 AM
do your knees hurt?

never, SI rocks!
TRICKY
06-13-2007, 11:40 AM
do your knees hurt?

...edit...
scott3824
06-13-2007, 12:12 PM
never, SI rocks!

+1
XtremeRR
06-13-2007, 03:22 PM
yeah the cage is great! only this screws! But tomorrow i buy new an better screws and i have a awesome cage! i donīt miss my FI


thanks for help