throttle grip slippin???

[r6_kidd]

what do you guys use to keep the grip on the throttle assembly from twisting around? I just replaced mine and used spray adhesive but it's still loose :Hum: should I just use crazy glue? let me know...l8r

[MIKE-SR]

????GSXR's grips have slots that fit into holes on the throttle tube, so they don't slip

[r6_kidd]

it's an R6

[tdiddy]

Yo use the wire stuff you would use to safety wire your bike for the track. Like this, most racers do this..

http://www.stuntusa.com/forums/attachment.php?attachmentid=12645&stc=1



Thank me later for the clear pic and all.. HAHA

[reeff]

Yo use the wire stuff you would use to safety wire your bike for the track. Like this, most racers do this..

http://www.stuntusa.com/forums/attachment.php?attachmentid=12645&stc=1



Thank me later for the clear pic and all.. HAHA

Ya that little wire stuff you know what I mean :Noooo: That small wire...........Oh ya work's good

[Herb]

Yo,just use 3M Weatherstrip adhisive.put some on the throttle tube and use a shop air nozzle to blow up the grip and slide it over the tube.It will never come unglued.

[okzr rider]

what do you guys use to keep the grip on the throttle assembly from twisting around? I just replaced mine and used spray adhesive but it's still loose :Hum: should I just use crazy glue? let me know...l8r


i use hair spray or spray paint .... the glue suxs in my oppion......

[warbuk]

i've always used hot soap water. slides rite on and when it dries its stuck.
always worked for me anyway.