is there a way to fix a clutch?

[decepticon13]

my suzuki clutch is so hard. compared to my brothers f4i. is there anyway to combat that problem. my finger gets so tired after a few wheelies. i just replaced it. new ebc clutch. stock springs

[CrTcHRkTRcR]

yes sir, new clutch cable, with graphite all over it... should make it way easier.. the clutch cables tend to kink up on gixxers.. they just get overly twisted sometimes..

waaa la

[Suicidal Antics]

yep. new cable will make a massive improvement. also make sure u have a regular length lever and not a shorty

[SPINE]

Make sure the cable that is on there is adjusted correctly too.

[StuntRagz Chris]

i w-40 my cable so it slides easier

[decepticon13]

alright so a new cable with graphite what? lubed with wd-40 should fix the problem for me? mike im not sure what you mean with the graphite. ill try all of that. what about adjusting it at the clutch cover?


anyone have a new gixxer clutch cable?

[decepticon13]

mike where do i get graphite?

[CrTcHRkTRcR]

from like a hardware store, or home depot or somethin, maybe even some rc car shops

[baseballfuries]

there's nothing to fix really, you just may have to make some changes with you clutch. graphite is a very big help, also lighter springs will make the pull easier, but I don't recommend that because your clutch could wear out faster. A good idea is go with the graphite lube, make sure your cable is adjusted right and an MSR raptor clutch lever and perch will help also, it has 3 adjustment levels giving you up to a 40 percent easier pull. that helps alot for one finger pulls. it has a rubber face on the lever which I just pull off. but that's up to you. good luck

[CrTcHRkTRcR]

good advice baseball... finally someone on a forum who actually has info