600RR Easy Clutch Mod

[XtremeRR]

today i have finnished my own easy clutch for my 600RR.only i must paint the parts in black. but it works soooooooo fine!!! thats very easy to pull

[chet3310]

Now that's some leverage, gees!

[TRICKY]

god job bro!

[old man roger]

might be a little too long ...

if you can get it to disengage with out having to adjust the lever tight then your good ,make sure you have a little play at the perch and lever

[old man roger]

and get it so the cable isn't rubbing or you will have a problem

[XtremeRR]

no OMR thats ok and it works fine! it´s very easy to pull but not to easy i think i have a good feeling at the lever.

[old man roger]

ok but that cable rubbing on the side will cause the cable to fray and if you have ever had a clutch cable break at the wrong time you would understand why im saying any thing at all..

all you have to do is bend the cable mount a little bit so the cable doesn't rub when you pull the clutch in and out . im just looking out for you ..

the fact that you can't see your cable makes it more important that it not be rubbing because if it does start to fray you won't know it till it snaps..

imagine what would happen if your clutch cable snapped in any rev limmiter trick or even just when your comming to a stop and the cable snapped..

please take two minutes and make sure it's not rubbing no harm in that right ?

ok i did my part and gave you my advise i will stop bothering you now ,sorry for the old guy rant

-omr-

[ACEJ]

Originally Posted by old man roger

ok but that cable rubbing on the side will cause the cable to fray and if you have ever had a clutch cable break at the wrong time you would understand why im saying any thing at all..

all you have to do is bend the cable mount a little bit so the cable doesn't rub when you pull the clutch in and out . im just looking out for you ..

the fact that you can't see your cable makes it more important that it not be rubbing because if it does start to fray you won't know it till it snaps..

imagine what would happen if your clutch cable snapped in any rev limmiter trick or even just when your comming to a stop and the cable snapped..

please take two minutes and make sure it's not rubbing no harm in that right ?

ok i did my part and gave you my advise i will stop bothering you now ,sorry for the old guy rant

-omr-

ok jeeezzzzz dad

[WOODMAN]

good point!!!!!

[TRICKY]

the problem with the rubbing cable was just in the picture, cause it was not finaly adjusted.
now that he has finished his project the cable runs out straight.

....he already knows about that problem, cause we had that problem when we first put on our ez-pull levers and noticed that there was something wrong and fixed it.
so it´s all good now, but thanks for your advice OMR, you have a good eye.

[AzN~BoI_585]

word OMR just lookin out for other ppl...I remember a while back some guys clutch cable snapped while he was in a SS revlimiter...

I will say this is one old school mod tho...onlything more gangsta then this was when i heard some old schoolers were choppin down their swingarms!